18CLEANING & SANITIZING PROCEDUREIce machine cleaner is used to remove lime scale orother mineral deposits. Sanitizer is used to removealgae or slime.Mix 4 liters of water with 500 ml of cleaner in a plasticor stainless container.Step 1 Set the toggle switch to the OFF position at theend of a Harvest Cycle, after ice releases from theevaporator. Or, set the switch to the OFF position andallow the ice to melt off the evaporator.Step 2 Remove all ice from the bin.Step 3 Remove all parts as described in Section 3,Component Identification & Removal.Step 4 Take all components to sink and with 2 litersCleaner/Water mixture clean all components with asoft nylon brush. Disassemble spray bar, removenozzles and inserts and soak for 5 minutes. Forheavily scaled parts, soak in solution for 15–20minutes. Rinse all components with clean water.Step 5 While components are soaking; use nylonbrush to scrub inside of ice bin. Scrub inside of door,door track, bin, sump trough, and evaporatormoldings. With clean water, rinse all of these areasthoroughly.Step 6 Replace sump overflow tube and pourremaining 2 liters of mixture into the water sump.Replace all parts.Step 7 To start a cleaning cycle, set the toggle switchto the WASH position.Cleaner Water500 ml (16 oz) 4 l (1 gal)! CautionNever use anything to force ice from theevaporator. Damage may result.
