Manley Massive Passive Stereo Tube Equalizer Owner's Manual
                                 | |
MAINS CONNECTIONSYour MASSIVE PASSIVE has been factory set to the correct mains voltage for your country.The voltage setting is marked on the serial badge, located on the rear panel. Check that thiscomplies with your local supply.Export units for certain markets have a moulded mains plug fitted to comply with local re-quirements. If your unit does not have a plug fitted the coloured wires should be connected tothe appropriate plug terminals in accordance with the following code.GREEN/YELLOW EARTHBLUE NEUTRALBROWN LIVEAs the colours of the wires in the mains lead may not correspond with the coloured markingidentifying the terminals in your plug proceed as follows;The wire which is coloured GREEN/YELLOW must be connected to the terminal in the plugwhich is marked by the letter E or by the safety earth symbol or coloured GREEN or GREENand YELLOW.The wire which is coloured BLUE must be connected to the terminal in the plug which ismarked by the letter N or coloured BLACK.The wire which is coloured BROWN must be connected to the terminal in the plug which ismarked by the letter L or coloured RED.DO NOT CONNECT/SWITCH ON THE MAINS SUPPLY UNTIL ALL OTHERCONNECTIONS HAVE BEEN MADE.Note: This unit has been factory wired for your country. If you plan to take the unit tocountries with a different mains voltage you will need to send the Limiter to Manley Labsfor the correct power transformer - or use AC voltage converters. See page 17 to convertthis unit for a different mains voltage.28 |
Related manuals for Manley Manley Massive Passive Stereo Tube Equalizer
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine