MuxLab 500010 Quick Installation Manual

MuxLab 500010 Quick Installation Manual Manual pdf 1 page image

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.com© MuxLab Inc. 94-000281-F SE-000201-FSpecificationsEnvironment VGA. VESA VP&D 1.0, VIP ver 2.0Devices VGA monitors, laptops, LCD projection screens, PCsTransmission Transparent to the userBandwidth DC to 60 MHzInput Signals Video: 1.1 Vp-p. Horiz & Vert Sync: TTL standard. 300kHz max.bandwidthInsertion Loss Less than 3 dB per pair over the frequency rangeCommon Mode Rejection Ratio(CMRR)15 kHz -60 dB max.100 kHz to 10 MHz -40 dB max.100 MHz -20 dB max.Video Signal Return Loss -15 dB max from DC to 60 MHzVideo Differential Gain ±2%Video Differential Phase ±2%Connectors RJ45 shielded500010: DB15 HD Plug & 6” lead (connects to VGA output of PC)500011: DB15 HD Receptacle (connects to VGA input of monitor)500014: DB15 HD Plug & 6” lead (connects to VGA input of monitor)Max. Distance viaCat 5E/6 UTP/STP Cable640x480 pixels (15 MHz): 450 ft (137 m)800x600 pixels (30 MHz): 350 ft (107 m)1024x768 pixels (60 MHz): 250 ft (76 m)1280x1024 pixels (100 MHz): 200 ft (61 m)RJ45 Pin ConfigurationReverse Polarity SensitiveR Video (Red) Pin 1 (+) Pin 2 (-) balancedG Video (Green) Pin 4 (+) Pin 5 (-) balancedB Video (Blue) Pin 7 (+) Pin 8 (-) balancedHoriz Sync Pin 3Vert Sync Pin 6Horiz. & Vert Sync Return: STP cable: Shield. UTP cable: NC+5 VDC Not connectedID0 Not connectedSDA Not connectedSCL Not connectedCable In order to ensure a common signal ground between the VGA Baluns,shielded Cat 5E/6 twisted pair (STP) cable terminated on shielded RJ45plugs at both ends is highly recommended.Impedance Input: RGB 75 ohms (DB15 HD) unbalancedOutput: RGB 100 ohms (RJ45 shielded) balancedTemperature Operating: 0° to 55°CStorage: -20° to 85°CHumidity: Up to 95% non-condensingEnclosure ABS fire retardant plasticDimensions 2.40” x 2.25 x 1.00” (6.10 x 5.72 x 2.54 cm)Mounting Freestanding. Separate Velcro mounting pad includedWarranty LifetimeOrder Information 500010 VGA Balun, PC Side, DB15 HD Plug500011 VGA Balun, Monitor Side, DB15 HD Receptacle500014 VGA Balun, Monitor Side, DB15 HD PlugVGA Balun500010, 500011 & 500014Quick Installation GuideOverviewThe VGA Balun allows VGA video signals to be transmitted up to 450 ft (137 m) via a 4-pair Cat5E/6 twisted pair cable for more cost-effective and versatile cabling. Used in pairs, the VGA Baluneliminates costly and bulky VGA cables, enabling VGA monitors to be connected at extendeddistances from the PC via standard Cat 5E/6 twisted pair cable. Used in pairs, one VGA Balun(500010) connects to the VGA source (i.e. output) and one VGA Balun (500011 or 500014)connects to the VGA destination (i.e. monitor input). The VGA Balun transmits the RGB video,horizontal and vertical synchronization pulses. Since the VGA Balun is a passive device and usesonly 8 wires, it does not support VGA handshaking/control signals.In order to ensure reliable signal continuity between the equipment, it is recommended to useshielded twisted pair (STP) cable terminated with shielded RJ45 connectors.ApplicationsThe VGA Balun allows pre-existing twisted pair cable to be used in such applications as classroomvideo distribution, overhead projector systems, PC-training systems, and tradeshow PC-demosystems.

/ 2

Related manuals for MuxLab 500010