MuxLab 500021 Installation Instructions Manual

Contents

MuxLab 500021 Installation Instructions Manual Manual pdf 1 page image

© MuxLab Inc.SpecificationsEnvironment Component (YPbPr) video. Composite video.Devices DVD, VCR, TV, satellite receivers, monitors,switchers, home theatre and other equipmentsupporting component video.Transmission Transparent to the user.Bandwidth Video: DC to 8 MHz.Maximum Input 1.1Vp-pInsertion Loss Less than 2 dB per pair over the frequency rangefrom DC to 8 MHzReturn Loss Greater than 15 dB over the frequency range fromDC to 8 MHzCommon ModeRejectionGreater than 40 dB @ 8 MHzMax. Distance Color –Cat 5 UTPComponent (YPbPr): 1,000 ft (305m).Composite: 2200 ft (670m)Cable – UTP 24 gauge or lower solid copper twisted pair wireimpedance: 100 ohms at 1 MHzMaximum capacitance: 20 pf/foot.Attenuation: 6.6 dB/1000 ft at 1 MHzCable – BNC Impedance: 75 ohms at 1 MHzConnectorsReverse polarity sensitiveOne (1) gold-plated RCA connectorTwo (2) screw terminals for twisted pairImpedance Input: 75 ohms unbalanced (RCA connector)Output: 100 ohms balanced UTP (screw terminals)Temperature Operating: 0° to 55°C. Storage:-20° to 85°C.Humidity: up to 95%Enclosure ABS fire retardant plasticDimensions 1.25” x 0.5” x 0.5” (3.2 x 1.3 x 1.3 cm)Weight 1.5 oz (42.5gm)Warranty LifetimeOrder Information 500021 VideoEase Component Video Balun5450 Cote de Liesse, MontrealQuebec, Canada, H4P 1A5Tel.: (514) 905-0588Fax: (514) 905-0589Toll Free (N.Am): (877) 689-5228E-mail: videoease@muxlab.comURL: www.muxlab.com94-000334-A SE-000311-AVideoEase Component Video Balun (500021)Installation GuideIntroductionThe VideoEase Component Video Balun allows a single component video signal(Y, Pb, or Pr) to be transmitted via cost-effective unshielded twisted pair (UTP)cable. Three (3) balun pairs are required for one point-to-point component (YPbPr)video connection. The product allows three coaxial cables to be replaced by oneCategory 5 twisted pair cable allowing standard structured cabling techniques to beused for neater and more streamlined cabling. The Component Video Balun iscompact enough to allow three (3) units to be connected side by side on the back ofthe component video equipment.InstallationComponent Video (YPbPr) Connection:Three (3) pairs of Component Video Baluns (six baluns) are needed to complete onecomponent (YPbPr) connection via Cat5 twisted pair. To install the VideoEaseComponent Video Baluns, perform the following steps:1. Identify the pin configuration of the baluns. One twisted pair is required. TheComponent Video Balun is reverse polarity sensitive. Please ensure that wiringis straight-through (Ring to Ring, Tip to Tip)Component Video Balun(500021)Top View (cover off)RingTipRCA male RingTipTwisted pair cable1 pairBlue/WhiteWhite/Blue Blue/WhiteWhite/Blue2. The Component Video Balun works in pairs. For each component signal (Y orPb or Pr), plug one balun into the component video output (coaxial) of thevideo source.

/ 2

Related manuals for MuxLab 500021