MuxLab 500765 Quick Installation Manual
  | |
Contents | 
© MuxLab Inc. 94-000859-A SE-000859-A8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsSpecificationsEnvironment Quad single-channel balanced analog audio and Dante audio.Devices Analog audio equipment and Dante professional audio equipment.Connectors Two (2) 6-pin phoenix connector, for Quad single-channel balanced analog audio-in.Two (2) 6-pin phoenix connector, for Quad single-channel balanced analog audio-out.One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair, for Ethernet connection.One (1) 2.1mm jack, for power.Maximum Distance 1) Network connection: Use Cat5e/6 at 330ft (100m) from Ethernet Switch.2) Balanced 2CH analog audio connection using a MuxLab 500028 Stereo HiFi Balun:Use Cat5e/6 at 3250ft (1km) from 500028 Stereo HiFi Balun.3) Balanced and Unbalanced connections directly connected to analog audioequipment: See analog audio equipment for maximum distance specifications.Note: When installed in an electrically noisy environment, an STP cable must be used. Also,cross-connection reduces the effective distance depending on the grade of twisted cable used.Signal Protocal/Standard DanteBandwidth Analog: 20Hz to 20KHz, Network: TBD.RJ45 Pin ConfigurationReverse Polarity Sensitive.Use EIA/TIA 568A or 586Bstraight-through wiring.RJ45 LinkPin 1 (R) Pin 2 (T)Pin 3 (R) Pin 6 (T)Pin 4 (R) Pin 5 (T)Pin 7 (R) Pin 8 (T)CablesNote: Cables not included.One (1) Cat 5e/6 or better twisted pair cables required.Eight (8) Quad single-channel balanced audio cables with 3-pin phoenix connectors (foraudio-in and audio-out).Power Source This device supports PoE (PD), an external power supply is not included. It is intended tobe powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply maybe purchased separately.PoE IEEE 802.3afPower Consumption 4.5WTemperature Operating: 0° to 40°C Storage: -20° to 85°CHumidity: Up to 95% non-condensingDimensions 4.4” x 4.6” x 1.0” (111mm x 120mm x 25mm)Weight 1.5lbs (0.7kg)Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0Warranty 2 yearsOrder Information 500765 Dante/Quad Channel Audio PoE GatewayAccessories 500920 16-Port Rackmount Transceiver Chassis500917 Wall Mount Transceiver Bracket Kit500989 Univ. Power Supply 12VDC/1.25A LOCK US/UK/EUDante/Quad Channel Audio PoE Gateway (500765)Quick Installation GuideOverviewThe Dante/Quad Channel Audio PoE Gateway permits non-Dante compatible analog audioequipment to interface with Dante compatible professional audio equipment, and may be managedby the Audinate Dante Controller software.The unit allows Dual two-channel or Quad single-channel full range (20Hz to 20KHz) balancedanalog audio signals to be transmitted over the network to Dante compatible professional audioequipment. Dual two-channel or Quad single-channel balanced analog audio signals may also bereceived from Dante compatible equipment in the same manner. The unit may be connected viaCat5e/6 cable up to 330ft (100m) from an Ethernet Switch.The Dante/Quad Channel Audio PoE Gateway includes four single-channel balanced analog audio-in and four single-channel balanced analog audio-out ports, via phoenix connectors. The Quadsingle-channel balanced analog audio-in ports may be connected to line level balanced analogaudio signals or to line level balanced microphones. The Quad single-channel balanced analogaudio-out ports may be connected to balanced analog audio amplifiers supporting line level inputs,such as the MuxLab 500217 Audio Zone Amplifier 100W, or to two pairs of powered speakers fordirect sound output.The device supports PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.ApplicationsInterfacing networked Dante digital audio equipment with 2CH analog audio equipment inprofessional and commercial audio applications over long distances.Installation1. Identify the connectors on the Dante/Quad Channel Audio PoE Gateway unit as indicated onthe product labels, see the above front and rear product views for further details. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine