MuxLab 500811 Quick Installation Manual
Also see for 500811: Operation manualOperation manualQuick installation guide
  |
© MuxLab Inc. 94-000821-A SE-000821-A8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsMuxLab ProDigital Network ControllerCPU Intel Z3735FMemory 2GB DDR3BIOS AMI BIOSVideo Resolution up to 1920 x 1080, ( HDMI or VGA monitor)Keyboard and Mouse USB keyboard & mouse optionalPeripherals• USB 2.0 ports (3x)• Micro SD slot (1x)• Network interface port (1x)Operating System Ubuntu 14.04 LTSMatrix Switching Time 3 seconds (maximum)Operating Temperature 5 ºC to 40 ºCDimensions 4.52 x 4.52 x 1.4 inch (115 x 115 x 35 mm)Weight 1.1 lb (0.5 kg)Accessories Included External Power AdaptorRegulatory FCC, CE, RoHS, WEEEOrder Information 500811 ProDigital Network ControllerPlease download the complete 500811 ProDigital Network Controllerproduct manual from the MuxLab web site (at www.muxlab.com).500811 ProDigital Network ControllerQuick Installation GuideOverviewThe MuxLab ProDigital Network Controller (500811) is a Linux-based PC that allows users tocontrol hub-installed MuxLab products via an Ethernet Web interface.When installed on a local area network (LAN), the MuxLab Network Controller will scan the LANfor connected MuxLab products allowing the user to auto-discover, configure and control theseproducts through an Ethernet Web interface. A third party API is also supported.ApplicationsApplication is for control of the MuxLab video over IP product line. The controller can be used toimplement a virtual matrix over IP.Installation1. Connect the Ethernet port of the controller to the Ethernet switch and then apply power to theunit (the Ethernet port should be connected before applying power). The unit will auto-start,there is no need to press the power button.2. During the power-up sequence the LED will initially transition from red to blue and requiresapproximately an additional 60 seconds for the unit to complete this cycle.3. With the use of a computer and a browser, connect to the controller web page.The default IP address is: 192.168.168.50The computer will need to be on the same local IP network.If the unit is configured in DHCP mode, then the IP address will be assigned by theDHCP/network server. Check with an IT administrator for available IP addresses.4. The next and final step is to setup and configure the ProDigital Network Controller via thecontroller web interface. In order to accomplish this, navigate to the MuxLab web site (atwww.muxlab.com) and download the 500811 ProDigital Network Controller productmanual. The manual will provide the necessary instructions to complete the remainingsystem setup and configuration. |
Related manuals for MuxLab 500811
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine