MuxLab 500812 Quick Installation Manual
  |
© MuxLab Inc. 2019 94-000905-A SE-000905-A2321 Rue Cohen, Montreal, Quebec, Canada. H4R 2N7Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: info@muxlab.com URL: www.muxlab.comSpecificationsMuxLab ProDigital Network ControllerCPU Intel Celeron J1800 Processor, @ 2.41GHz 4 coresMemory 2GB DDR3Display Integrated Intel HD Graphics, 1x HDMI and 1x VGAKeyboard and Mouse USB keyboard and mouse (not required and not included)Peripherals• USB 2.0 ports (3x)• SS USB 3.0 port (1x)• Network gigabit interface (2x)• VGA Video out port (1x)• HDMI Video out port (1x)• Audio in via 3.5mm port (1x)• Audio out via 3.5mm port (1x)• RS232 port (1x)Operating System Ubuntu 18.04 LTSTemperature/Humidity Operating: 0 ºC to 50 ºC, Storage: -20 ºC to 80 ºCHumidity: 10% to 90% (non-condensing)Dimensions 5.24 x 5.00 x 1.38 inch (133 x 127 x 35 mm)Weight 1.5lbs (0.7kg)Accessories Included External 12VDC @ 2A Power AdaptorRegulatory FCC, CE, RoHS, WEEEOrder Information 500812 Pro Digital Network ControllerPlease download the complete 500812 ProDigital Network Controllerproduct manual from the MuxLab web site (at www.muxlab.com).500812 ProDigital Network ControllerQuick Installation GuideOverviewThe MuxLab ProDigital Network Controller (500812) is a Linux-based PC that allows users tocontrol hub-installed MuxLab products via an Ethernet Web interface.When installed on a local area network (LAN), the MuxLab Network Controller will scan the LANfor connected MuxLab products allowing the user to auto-discover, configure and control theseproducts through an Ethernet Web interface. A third party API is also supported.ApplicationsApplication is for control of the MuxLab Audio/Video over IP product line. The controller can beused to implement a virtual matrix, splitter, and other configurations over IP.Installation1. Connect the Ethernet LAN 1 port of the controller to the Ethernet switch and then applypower to the unit (the Ethernet LAN 1 port should be connected before applying power). Turnon the Power Switch. Note that LAN 2 port is configured as a DHCP client, and can beutilized for control purpose only.2. The unit will go through a power-up sequence.3. With the use of a computer and a browser, connect to the controller web page.The default IP address is: 192.168.168.50The computer will need to be on the same local IP network segment.If the unit is configured in DHCP mode, then the IP address will be assigned by theDHCP/network server. Check with an IT administrator for available IP addresses.4. The next and final step is to setup and configure the ProDigital Network Controller via thecontroller web interface. In order to accomplish this, navigate to the MuxLab web site (atwww.muxlab.com) and download the 500812 ProDigital Network Controller product manual.The manual will provide the necessary instructions to complete the remaining system setupand configuration. |
Related manuals for MuxLab 500812
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine