My Child Sienta Duo User Manual
                    | |
page 51. Line up the rear wheel assembly withthe back legs of the pushchair, so thatthe frame ‘LOCK’ (A) and the ‘BRAKE’pedal (B) will be able to connect.2. Push the wheel assembly onto theback leg until the spring pins (C) click intoplace.3. Place the ‘BRAKE‘ pedal (D) into the slot on the frame ‘LOCK‘ (E).4. Insert the locking pin (F) into the hole on the side of the frame ‘LOCK’ and push it allthe way through to connect the ‘BRAKE‘ pedal to the frame ‘LOCK’.5. Thread the locking ring (G) through the hole on the end of the locking pin.Rear wheel assemblyABCFEDGclick |
Related manuals for My Child Sienta Duo
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine