MyFan The Modn-4 Owner's Manual
             | |
▲WARNINGDo not install or use fan if any part is damaged ormissing. This product is designed to use only thoseparts supplied with this product and/or any accessoriesdesignated specifically for use with this product.Substitution of parts or accessories not designatedfor use with this product could result in personal injuryor property damage.IF ANY PART IS DAMAGED OR MISSING,CALL: 1 3 0 0 4 6 9 3 2 6This manual is designed to make it as easy as possibleto assemble, install, operate, and maintain this ceiling fanUnpacking InstructionsFor your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that allsteps have been completed and will be helpful in finding your place should you be interrupted.Wiring and connectors must be of type required bylocal regulations. The minimum wire would be a 3-conductor (2-wire with ground).Tools Needed for Assembly MaterialsNOTE: If you are uncertain of part description, refer toexploded view illustration. (Figure 1, page 10)31. Check to see that you have received the followingparts:• Fan Motor Assembly• Hanger Bracket• End Plate AssemblyBlade Set•• One Phillips head screwdriver(supplied)• One stepladder• One small bladescrewdriver• One wire stripper▲WARNINGThis fan must be installed by a licensed electrician.Fan Motor AssemblyHanger BracketEnd Plate AssemblyBlade SetHardware BagsWall ControlSpeed CapacitorWall Control•Speed Capacitor•• Hardware bags:– 3/16˝-24 screws with lock washer& flat washers (blade to fan motor flywheel)– Phillips Screwdriver, 10 cm– Hex Washer Phillips Head TappingScrews Ø4.8– #8-32 Pan Head Screws– Flat Washers– External Tooth Washer– Spring Washer |
Related manuals for MyFan FP6722AU
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine