4INSPECT FOR DAMAGENOTE: Inspect materials for concealed shipping damage. You only have 11 days to file afreight claim. If items are damaged or missing, please call Myson at 1-800-698-9690.INSPECTION FOR COMPLETENESSUnpack the Select Radiator carefully to avoid damage or loss of parts.The Select Radiator should come with the following parts:2 - Concrete wall brackets1 - Stainless steel solid plug1 - Stainless steel air vent plugINTRODUCTIONThe Myson Select Radiator will keep any room in comfort and style. We at Myson, Inc. thank youfor your purchase of the Select Radiator. Each radiator combines Myson’s compact design andadvanced steel construction with a durable baked epoxy/polyester enamel powder coat finish.Myson’s sleek styling and thorough testing provides attractiveness and dependability. Myson’sgoal is to assure the highest performance, quality, reliability and outstanding customer service.CAUTIONStep 1 Read this entire instruction manual thoroughly before beginning installation.Step 2 To ensure full efficiency of your Myson Select Steel Panel Radiator, please follow all theinstructions carefully observing the caution notes for each step.Step 3 Failure to follow these instructions will invalidate the manufacturer’s warranty.APPLICATIONMyson radiators are only for use in recirculating closed loop hydronic heating systems. Theseradiators are not recommended for gravity systems. Myson Select Radiators are designed to workwith a maximum working pressure of 78 PSI and no more then 212 degrees F water temperature.DO NOT USE STEAM IN THESE RADIATORS.DESIGN AND LAYOUT CONDITIONSMyson Select Radiators should only be used with a recirculating pump closed loop hydronicheating system. Please consult national and local codes for specific restrictions that may beimposed on your installation. Position your radiator away from your circulator pump to avoideither excess pressure that could force water out the air vent or excess suction that could drawair into the system. The preferred positioning for the Select radiator is below a window whereit can minimize downdrafts from glazed areas.Myson Radiators may be hot to the touch. Generally the surface temperature is at 10-12degrees Fahrenheit below system water temperature. Care must be taken to consider roomoccupant’s ability to sense or understand that radiators may be hot. Should radiator surface orsystem water temperature be an issue, please contact MYSON at 1-800-698-9690 for informationon the MYSON LST radiators. LST (Low Surface Temperature) Radiators can be a viable solutionwhere temperatures are a safety concern.Select Radiator SeriesBefore You BeginMYSON