Myson Kickspace 500E ECO Installation & Operating Manual

Also see for Kickspace 500E ECO: Installation & operating manual

Contents

05KICKSPACE ® 500E ECO & 600E ECOOperating Modes (continued...)Function AdjustmentDescriptionHoliday FunctionProvides frost protection or overheat protectionduring periods of absence (holiday).Boost FunctionBrings the unit on irrespective of theprogramme or temperature setting fora predefined period.Default is 30 minutes.Can be used in Comfort, Auto,Night Set-Back mode.Programme MenuProvides choice from 9 pre-programmed and4 user defined timed programmes.The display will show the ambient temperature.Press (OK), set temperature will begin to blink.Use or to adjust the required room temperature.Press (OK) to confirm.The ambient room temperature will then display.Default setting +19°CMax temp setting +19°C - night set back temperature can notbe higher than comfort mode set point.Min temp setting +5.5°CNote: To see the set temperature simply press .Night Set-back SettingProvides room temperature controls for whenthe room is not occupied.5.0 Controls (continued...)• For permanent frost protection select and press (OK).is shown in permanent frost protection.• For holiday frost protection press (OK) again, ‘no’ will blink.Press button to increase number of hours (1-24)/days (1-99),and press (OK) to confirm. Thermostat is now in holiday mode.The will blink and will continue to blink until thetimer ends.It is possible to exit the holiday function by pressing andholding for 2 seconds.Select using or or directly using button 20.The time period in minutes will blink.Use or to adjust time by increments of 10 minutes.Press (OK) to confirm, the hourglass will begin to blinkand countdown.It is possible to exit boost function by pressing .Refer to following page.5.0PSelect using