Omega Dimmer series User manual version 1.0 09.2011 4Safety Instructions● Please keep this User manual for future consultation. If you sell the unit to another user, be surethat they also receive this instruction broshure.● Always make sure that you are connecting to the proper voltage.● Make sure there are no flammable materials close to the unit while operating.● Always disconnect from power source before servicing or replacing fuse and be sure to replacewith same fuse source.● Maximum ambient temperature (Ta) is (+40°C). Its not recomended to operate device attemperature higher than maximum ambient.● In the event of a serious operating problem, stop using the unit immediately. Never try to repairthe unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.Please contact the nearest authorized technical assistance center. Always use the same typespare parts.● Make sure the power cable is never crimped or damaged.● Never disconnect the power cord, pulling the wire.● The addition of the power cord, a voltage must be disconnected.Caution!There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairsyourself. In the unlikely event your unit may require service, please contact„Company NA” at: +371 6780 1111.Please read instruction carefully, which includes importantinformation about the installation, usage and maintenance ofthisproduct.