NAC Image Technology Memrecam Q1v User Manual

NAC Image Technology Memrecam Q1v User Manual Manual pdf 86 page image

Recorder■ Live Image OutputOutput Method PC live output with Ethernet GigE VisonRaw data of images the PC receives from MEMRECAM is converted toimages for displayRefresh Rate Depends on the network status between the MEMRECAM and the PC aswell as the recording resolution・About 5 frames/sec When the display resolution is1280x1024・About 20 frames/sec When the display resolution is 680x480■Recording ConditionsRecording Start Conditions ARM Command (ARM from HXLink or such)Recording End Conditions Recording Trigger Vibration (IF connector TRIG IB)REC Command (REC from HXLink or such)■ Recording Trigger ModeNormal Trigger Normal recording trigger■ Trigger TimingSTART The trigger point is about 5% before the beginning of the recordingmemoryCENTER The trigger point is the center of the recording memory (About 50％)END The trigger point is about 5% before the end of the recording memoryCUSTOM The trigger point is at a preset value (-100～100%) , set at 1%intervals4-12(00375)