Jump to a Specific frameJump to a Specific frameJump to a start or end frame of a recording, a frame where the trigger has been input or the framewhere the event trigger has been input for event recording（A 4-43）3-31(00400)■Jump FramesAvailable in the STOP mode. The J-PAD3 LCD display shows the status.Destination Operation DescriptionTrigger Frame Move to the trigger frame (frame with triggerinput). (※１)Start FramePress the TRIG andREV buttonsMove to the start frame of the recorded video.End FramePress the TRIG andFWD buttonsMove to the end frame of the recorded video.Event Frame(※２)Move to the next event frame when pressed. Moveto the trigger frame with the first operation.※１ If there is no trigger frame in the recording it moves to the beginning frame.※２ Use the event recording function only when recording event frames.See (A 4-42 ) for Event Recording .
