NAD 3155 Specification Sheet
    | |
PRE-AMP SECTIONPhono inputInput impedance (R and C) MM 47kΩ / 100/200/320pFMC 100Ω / 1000pFInput sensitivity, 1kHz MM 2.8mVMC 0.28mVSignal/Noise ratio (A-weighted with cartridge connected) MM 78dB ref. 5mVMC 78dB ref. 0.5mVTHD (20Hz - 20kHz) <0.04%RIAA response accuracy (20Hz - 20kHz) ±0.5dBLine level inputsInput impedance (R and C) 10kΩ / 220pFInput sensitivity (ref. 1W) 25mVMaximum input signal >10VSignal/Noise ratio (A-weighted ref 1W) 86dBFrequency response 20Hz - 20kHz / ±0.5dBLine level outputsOutput impedance Pre-amp 800ΩTape Source Z + 1kΩMaximum output level Pre-amp 10VTone controlsTreble ±7dB at 10kHzBass ±7dB at 100HzBass EQ +3dB at 70Hz+6dB at 32HzInfrasonic filter (switchable) -3dB at 15Hz - 12dB/octavePOWER AMP SECTIONContinuous output power into 8Ω * 55W (17.4dBW)Rated distortion (THD 20Hz - 20kHz) 0.03%Clipping power (maximum continuous power per channel) 65WIHF Dynamic headroom at 8Ω +3dBIHF dynamic power (maximum short term power per channel) 8Ω 100W4Ω 100W2Ω 130WDamping factor (ref. 8Ω, 50Hz) >50Input impedance 22kΩInput sensitivity (for rated power into 8Ω) 1.3VTHD (20Hz - 20kHz) <0.03%Bridged ModeContinuous output power into 8Ω * 125W (21dBW)IHF Dynamic headroom at 8Ω +2.5dBIHF dynamic power (maximum short term power per channel) 8Ω 250WRemote YesNAD Link YesPHYSICAL SPECIFICATIONSDimensions (W x H x D) 420 x 108 x 380mmNet weight 8.4kgShipping weight 9.8kgPower consumption (120 ~ 240V, 50/60Hz) 340W* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.Dimension depth excludes terminals, sockets, controls and buttons.© NAD Electronics. All rights reserved. E & OE |
Related manuals for NAD 3155
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine