NAD C 326BEE Owner's Manual

Also see for C 326BEE: Specifications Service manual User manual

Contents

NAD C 326BEE Owner's Manual Manual pdf 8 page image

1 mp input: Input for a Media Player or other line-level signal source.Use a twin RCA-to-RCA lead to connect the Media Player’s left and right“Audio Outputs” to this input.NOTEIf an external Media Player is connected to the front MP socket (using a3.5mm stereo plug) while listening to a MP line-level source, the externalMedia Player will be directly selected with the MP line-level sourceimmediately disconnected.2 cd input: Input for a CD or other line-level signal source. Use atwin RCA-to-RCA lead to connect the CD player’s left and right “AudioOutputs” to this input.3 tuner input: Input for a tuner or other line-level signal source. Usea twin RCA-to-RCA lead to connect the tuner left and right “AudioOutputs” to this input.4 diSc input: Input for additional line level input signals such as CD,Mini Disc player or the output signal from a step-up amplifier for aturntable. Use a twin RCA-to-RCA lead to connect the auxiliary unit’s leftand right “Audio Outputs” to this input.5 aux input: Input for additional line level input signals such asanother CD player. Use a twin RCA-to-RCA lead to connect the auxiliaryunit’s left and right “Audio Outputs” to this input.6 video input: Input for the audio signal from a stereo VCR (or stereoTV/Satellite/Cable receiver) or other line-level audio source. Using twinRCA-to-RCA leads, connect to the left and right ‘Audio Outputs’ of theunit to these inputs.7 tape in/out: Connections for analog recording and playback to anaudio tape recorder of any type. Using twin RCA-to-RCA leads, connectto the left and right “Audio Output” of the tape machine to the TAPE INsockets for playback. Connect the left and right “Audio Input” of the tapemachine to the TAPE OUT sockets for recording.to make a recordingWhen any source is selected, its signal is also fed directly to any tapemachine connected to the TAPE OUT for recording.8 Sub 1, Sub 2: Unlike the full range channels, there is no poweramplifier built-into the C 326BEE for a subwoofer. Connect the SUB 1or SUB 2 output or both to powered (“active”) subwoofers or to poweramplifier channels driving a passive system.9 pre out: Connections to an external power amplifier or processor, suchas a surround-sound decoder. In normal use, this should be connected tothe Main In sockets with the links supplied. To connect your NAD C 326BEEto external processor or amplifier sections, remove first these links. Use atwin RCA-to-RCA lead to connect the left and right “Audio Input” of a poweramplifier or processor to the PRE OUT sockets.Always turn the C 326BEE and associated external power amplifiers OFFbefore connecting or disconnecting anything to the PRE OUT sockets.The PRE OUT output signal will be affected by the C 326BEE’s volumeand tone control settings.IDENTIFICATION OF CONTROLSrear panelATTENTION!Please make sure that the C 326BEE is powered off or unplugged before making any connections. It is also advisable to power down or unplug allassociated components while making or breaking any signal or AC power connections.1 432 5 6 7 8 9 10 12 1615141311ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ