NAD C375BEE Owner's Manual

Also see for 375BEE C: Service manual Datasheet

Contents

NAD C375BEE Owner's Manual Manual pdf 8 page image

IDENTIFICATION OF CONTROLSREAR PANELATTENTION!Please make sure that the C3758EE is powered offor unplugged before making any connections. It is also advisable to power-down or unplug allassociated components whife making or breaking any signal or AC power connections.MP input: Input for a Media Player or other line-level signal source.Use a twin RCA-to-RCA lead to connect the Media Player's left and right"Audio Outputs" to this input.NOTEIf an external Media Player is connected to the front MP socket (using a3.5mm stereo plug) whife listening to a MP line-level source, the externalMedia Player will be directly selected with the MP line-level sourceimmediately disconnected.2 CD INPUT: Input for a CD or other line-level signal source. Use atwin RCA-to-RCA lead to connect the CD player's left and right "AudioOutputs"to this input.3 TUNER INPUT: Input for a tuner or other line-level signal source. Usea twin RCA-to-RCA lead to connect the tuner left and right "AudioOutputs" to this input.4 DISC INPUT: Input for additional line level input signals such as CD,Mini Disc player or the output signal from a step-up amplifier for aturntable. Use a twin RCA-to-RCA lead to connect the auxiliary unit's leftand right "Audio Outputs"to this input.NOTEWith the optional PP 375 PHONO MODULE installed, the DISC inputsocket is disabled and the PHONO source selected as the active input.5 AUX INPUT: Input for additional line level input signals such asanother CD player. Use a twin RCA-to-RCA lead to connect the auxiliaryunit's left and right "Audio Outputs" to this input.86 TAPE 2 IN/OUT: Connections for analog recording and playback to anaudio tape recorder of any type. Using twin RCA-to-RCA leads, connectto the left and right "Audio Output" of the tape machine to the TAPE 2 INsockets for playback. Connect the left and right "Audio Input" of the tapemachine to the TAPE 2 OUT sockets for recording.7 TAPE MONITOR IN/OUT: Connections for analog recording andplayback to a secondary audio tape recorder of any type. Using twinRCA-to-RCA leads, connect to the left and right"Audio Output"ofthe tape machine to the TAPE MONITOR IN sockets for playback andtape monitoring. Connect the left and right "Audio Input" of the tapemachine to the TAPE MONITOR OUT sockets for recording.TO MAKE A RECORDINGWhen any source is selected, its signal is also fed directly to any tapemachine connected to the TAPE 2 OUT or TAPE MONITOR OUT forrecording.TAPE TO TAPE COPYINGYou can copy between two tape machines connected to your NADC 375BEE. Put the source tape in the recorder connected to Tape 2and the blank tape into the recorder connected to Tape Monitor. Byselecting TAPE 2 input you can now record from Tape 2 to Tape Monitorand monitor the signal coming from the original tape.NOTEThere will be no Tape 2 output when Tape 2 (or Tape Monitor OUT whenTape Monitor) is the selected source input. This prevents feedbackthrough the recording component thereby preventing possible damageto your speakers.