1 POWER: Press this button to switch oN the C 715. The Standby lEDindicator will turn from amber to blue and illuminate the VacuumFluorescent Display (VFD). Pressing the power button again turns theunit back to standby mode.If the disc tray is open and the C 715 is powered oFF, the disc tray willdraw close and the unit powered oFF.2 INDICATOR: This indicator will light up amber when the C 715 isin standby state. When the C 715 is at oN state, this indicator willilluminate blue.3 DISC TRAY: With the DISC TRAy open, insert a compatible media discface down onto the tray.“No Disc” appears on the C 715’s VFD if the disc is placed upside down.4 SOURCE: Toggle this button to select through the following sources:FM / AM / DAb CD USbMP AUX VIDEo TAPE5 RECORD: Use this button to start recording to a USb device.6 BAND / (PLAY) [ ]: In CD or USb mode, press this button to startplayback. If the disc tray is open, press this button to automaticallyclose the tray and start playback if a disc is loaded.In AM/FM/DAb mode, toggle this button to select AM, FM or DAbmode.7 FM MODE/ (PAUSE) [ ] : In FM mode, this button will toggle betweenFM Stereo and FM Mono. The front panel [FM MoDE] key is a dual-purpose control. In the normal position, (“STEREo” and “TUNED” iconsare illuminated in the VFD) only the stations with a strong signal can belistened to and the noise between stations is muted.Pressing the [FM MoDE] button again (“STEREo” icon is extinguished;only “TUNED” is illuminated) allows distant and potentially noisy stationsto be received. Noise is reduced if the FM station signal level is less thanthe FM stereo threshold (since mono FM is inherently less noise-prone)though at the sacrifice of stereo effect.In CD or USb mode, press this button to toggle between Pause and Playof a compatible media disc.8 RDS MODE/ (STOP) [ ]: When tuned to a RDS station, toggle thisbutton to cycle through the following RDS modes:PRoGRAM SERVICERDS CloCk TIMERDS PRoGRAM TyPERDS RADIo TEXTTRAFFIC ANNoUNCERefer to the section “RDS MoDE oPTIoNS” for a description of the abovemodes.In CD or USb mode, press this button to stop playback and re-set thepickup to the beginning of the disc. The display reverts to showing thetotal number of tracks and total playing time of an audio disc or totalnumber of WMA/MP3/Audio files. If the C 715 was programmed to playa selection of tracks, the program will be retained in the memory.IDENTIFICATION OF CONTROLSFRONT PANEL16 17 18141312 15111012 3 4 5 6 7 8 97ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ