NAD L55 Owner's Manual

Also see for L55: Specifications Service manual

Contents

NAD L55 Owner's Manual Manual pdf 37 page image

GB37SELECTING DIGITAL AUDIO OUTInitial SettingsEach DVD disc has a variety of audio output options. Set the player’sDigital Audio Output according to the type of audio system you use.1 At the SETUP screen, press to select Digital Audio Outputand press2 Press to select the desired output and press ENTER.DOLBY DIGITAL/PCMSelect “DOLBY DIGITAL/PCM”if an active digital output is supplied to theDolby Digital decoder, (or an amplifier or other equipment with a DolbyDigital decoder).STREAM/PCMSelect “Stream/PCM” if an active digital output is supplied to anamplifier or other equipment with DTS decoder, Dolby Digital decoderand MPEG decoder.PCMSelect “PCM” if an active digital output is supplied to an amplifier orother equipment with linear PCM only (or MD recorder or DAT deck).NOTES• When you are not using the player’s digital audio output, don’t selectany of the options.• If an active digital audio output signal is supplied to an receiver orother equipment without a corresponding digital decoding capability,a very loud noise may be produced which could permanentlydamage the speakers.• The DTS DVD disc sound is played back only when the DVD player isconnected to a receiver with a DTS decoder.Disc SubtitleDisc MenuRatingPasswordTV AspectMenu LanguageTV Output SelectPseudo PALDigital Audio OutputDisc Audio DOLBYDIGITAL /PCMStream/PCMPCMDisc SubtitleDisc MenuRatingPasswordTV AspectMenu LanguageTV Output SelectPseudo PALDigital Audio OutputDisc Audio DOLBYDIGITAL /PCMStream/PCMPCM1,296 kHz LinearPCM DVDPCM PCM PCMDTS DVD DTS Bit Stream No Output Audio OutputDolby Digital DVD Dolby Digital BitStreamDolby Digital BitStreamPCMMPEG DVD MPEG Bit Stream PCM PCMAudio CD PCM PCM PCMDTS Audio CD DTS Bit Stream DTS Bit Stream DTS Bit StreamPlayback Disc OUTPUTStream / PCM Dolby Digital /PCMPCM only