NAD M22 Owner's Manual

Also see for M22: Quick setup guide Quick setup guide Service manual Quick setup guide

Contents

NAD M22 Owner's Manual Manual pdf 6 page image

1 o (STANDBY)• Press o (Standby) button for the M22 to be switched ON fromstandby mode. The Power indicator will turn from amber to bright/white color.• Press and hold o (Standby) button until M22 switches back tostandby mode. The Power indicator will illuminate to amber color atstandby mode.• The o (Standby) button cannot activate the M22 with the rearpanel POWER switched off.IMPORTANT NOTEFor the o (Standby) button to activate, two conditions must becompleted.• Plug-in the supplied mains power cord to a mains power source.Connect corresponding end of the mains power cord to the AC mainsinput of M22 and the plug connected to a mains power source.• The rear panel POWER switch must be set to ON position.AUTO STANDBYThe M22 can be setup to automatically go to standby mode if there isno active source input within 30 minutes. Auto standby mode can beenabled or disabled by the following steps.Enable Auto Standby mode• With M22 at operating mode, press and hold the rear panel LEDLEVEL button until the Power indicator (NAD logo) flashes once.• At operating mode, the M22 will automatically go to standby modeif there is no active source input within 30 minutes.Disable Auto Standby mode• With M22 at operating mode, press and hold the rear panel LEDLEVEL button until the Power indicator (NAD logo) flashes twice.• At operating mode, M22 will not automatically go to standby modeeven if there is no active source input within 30 minutes. Press o toswitch M22 from operating mode to standby mode.2 POWER INDICATOR (NAD LOGO)• The NAD logo in the front panel also serves as a Power indicator.• Power indicator colorsBright/white: Normal operating modeAmber: Standby modeRed: Protect modeIDENTIFICATION OF CONTROLSFRONT PANEL© NAD M22M22STEREO POWER AMPLIFIER DigitalPowerDrive126ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ