NAD M32 Owner's Manual

Contents

NAD M32 Owner's Manual Manual pdf 13 page image

EQThe M32 has the following Tone Control levels – Treble, Bass and Balance.Bass and Treble controls only affect the low bass and high treble leavingthe critical midrange frequencies free of coloration. The Balance controladjusts the relative levels of the left and right speakers.h : Slide to adjust treble, bass or balance level.: Slide to turn ON or OFF Tone Controls. At OFF setting, tonecontrols (Treble and Bass) are disabled or defeated – Balance optionremains available.SETUPThe Setup menu contains the menu options for Speaker Setup, SourceSetup, Digital Output and Control Setup.SPEAKER SETUPSPEAKER COMPENSATIONThe digital impedance compensation filter provides fine tuning of thetop octave to match your speaker impedance. This results in perfectly flatfrequency response at 20 kHz. The effect of this filter may not be audible*but it is measurable and it compensates for the small effect of the digitalreconstruction filter that eliminates the 844 kHz sampling frequency of theamplifier.* The exception may be some electrostatic speakers that have very lowimpedance at high frequency. The lower the HF impedance, the greaterthe deviation from flat response.SUB OUTPUTAt “ON” Setting, all subwoofer settings are in effect. At “OFF” setting, allsubwoofer settings are disabled. With Sub Output set to “ON”, the followingsubwoofer settings can be setup.IMPORTANTSet the “Sub Output” option under “Speaker Setup” settings to “ON” forthe OUTPUT terminals to function as Subwoofer out. On the other hand,the OUTPUT terminals will function as PRE-OUT if the “Sub Output”option is set to “OFF”.OPERATIONUSING THE M3213ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ