NAD T 532 Owner's Manual

Also see for T512: Owner's manual

NAD T 532 Owner's Manual Manual pdf 8 page image

Rear Panel8S-VIDEOOUTLRDIGITALOUT AUDIOOUTVIDEOOUTVIDEOOUTPUTSCART/RGBS-VIDEOCOAXIALOPTICALDIGITALOUTCOAXIAL (Digital audio out jack)Connect to digital (coaxial) audio equipment.VIDEO OUTPUT SwitchSelect either S-VIDEO OUT or SCART’s RGB signal,depending on how you connected the DVD Player tothe TV.OPTICAL (Digital audio out jack)Connect to digital (optical) audioequipment.AUDIO OUT (Left/Right)Connect to an amplifier, receiver, or stereosystem.*System Select switchSCART/RGB OUT JackConnect to a TV with SCART jack.Do not touch the inner pins of the jacks on the rearpanel. Electrostatic discharge may cause permanentdamage to the unit.Dust protection capRemove the dust protection cap from the OPTICALDIGITAL OUT jack and connect the optical digital cable(not supplied) securely so that the configurations ofboth the cable and the connector match. Keep the dustprotection cap and always reattach the cap when notusing the connector to protect against dust intrusion.Dust protection cap* System Select switchYou can enjoy NTSC or PAL discs by using SystemSelect switch to choose the appropriate system.PAL: Select when DVD player is connected withPAL-TV.NTSC: Select when DVD player is connected withNTSC-TV.AUTO: Select when DVD player is connected withMulti system TV.• When the selected System Select switch does notcoincide with the system of your TV, normal colorpicture may not be displayed.• Set System Select switch when the power is turnedoff.12V TRIGGER IN (T 532 only)By connecting this DVD player to another NAD audio componentor system controller equipped with a 12V trigger output, you canremotely operate the T572 power ON/OFF.VIDEO OUTConnect to a TV with video inputs.AC Power CordPlug into the power source.S-VIDEO OUTConnect to a TV with S-Video inputs.