1 81 81 81 81 8ABOUT THE ON-SCREEN DISPLAYS (OSD) AND FRONT-PANEL READOUTCREATING AND USING PRESETSThe T 743’s simple but powerfully flexible system of “Presets” allows you to customize virtually every aspectof your audio-video playback, and recall them with a single key-press. Every parameter of T 743 operationthat is available from the main menu — input settings, level settings, delay settings, speakersettings, and listening mode selection and adjustments — is stored, together, as a single Preset. You mightcreate one Preset optimized for pop music and another for classical, or Presets that recall each familymember’s favorite setup, or one for fully cinematic home-theater playback and another for late-nightmovies, with each Preset’s surround mode, channel levels, and speaker-setup fine-tuned to a particularscenario or preference.CREACREACREACREACREATING PRESETSTING PRESETSTING PRESETSTING PRESETSTING PRESETSCreating a Preset consists simply of storing a complete set of all settings accessible from the main menu, including Tone Control settings. To save a collection of settings to a Preset, use the HTR 2 remote’s[/] keys to scroll to the to main item. Use [/] to scroll to the desired Preset’s line[1-5]; will be flashing. Now press the HTR 2’s [Enter] to store the Preset; will be stopflashing, confirming that the Preset has been stored.NOTE: The selected Preset remains in force until you select a different Preset.NOTE: It is strongly recommended to leave Preset 1 “empty”; that is, memorized with no changes at allmade to the calibrated values you have entered on all of the menu lines. This will make returningto your calibrated setup defaults easy.RECALLING PRESETSRECALLING PRESETSRECALLING PRESETSRECALLING PRESETSRECALLING PRESETSYou may recall a Preset at any time; the newly recalled Preset will replace the previous Preset (if any).Presets can only be recalled using the HTR 2 remote:Press the HTR 2’s square [A/V Preset] key (red dot), then press the numeric key 1-5 corresponding to thedesired preset.NOTE: The [A/V Preset] key works as a momentary “shift” key: You must press it every time before invokinga Preset via a numeric key.
