ENGLISH9The T 778 can be setup or configured using either of the following twomethods• On-Screen-Display (OSD)• Touch Screen Front Panel DisplayThe T 778 employs a simple, self-explanatory system of on-screen display“menus” that will appear on the connected video monitor/TV. These arerequired during the setup process (and are useful in day-to-day operation),so be sure to connect the monitor/TV before proceeding with setup.DISPLAY THE OSDPress [S], [MENU] or [ENTER] buttons of the HTR 8 remote control to displaythe T 778’s Main Menu on your video monitor/TV. If the OSD does notappear, check your HDMI OUT connections.IMPORTANTThe OSD can only be viewed using a display device with minimum1080p resolution.NAVIGATING THE OSD AND MAKING CHANGESUndertake the following guidelines to navigate through the OSD menuoptions using the HTR 8 remote control.1 Press [S] to select a menu item. Use [D/F] or in some cases, [ENTER],to move up or down the Menu selections. Repeatedly press [S] toadvance or go further into the sub-menu of desired menu item.2 Use [D/F] to set or change the parameter value (setting) of a menuitem.3 Press [A] to save the settings or changes done on the current menu orsub-menu. Pressing [A] will also return the user to the previous menu orexit from a particular menu.MAIN MENUThe Main Menu contains menu options for “DSP Options”, “Tone Controls”,“Zone Controls”, “System Info” and access to “Setup Menu”.Follow the guidelines about “DISPLAY THE OSD” and “NAVIGATING THE OSDAND MAKING CHANGES” to navigate through the menu options and theirsub-menu selections.NOTEThe individual configurations set forth at “DSP Options” and “ToneControls” are carried over whenever they are enabled at A/V Presetssetting. Refer also to the section about “A/V PRESETS”.DSP OPTIONSThe following signal processing parameters can be setup under the DSP(Digital Signal Processing) Options menu.LIP SYNC DELAYDSP Options has the feature “Lip Sync Delay” whose function is to matchany delay that may occur in the picture relative to the audio.By varying “Lip Sync Delay” from 0ms to 120ms, one can delay the audiooutput in order to synchronize it with the video image.TONE CONTROLSThe T 778 has three Tone Control levels – Treble, Bass and Center Dialog.Bass and Treble controls only affect the low bass and high treble leavingthe critical midrange frequencies free of coloration. The Center Dialog(“Dialog” in the front panel display) control boosts the “presence” of themidrange region improving intelligibility of speech.These controls allow one to tweak on-the-fly, the frequency responseof the source during playback. The control setting could be adjusted bynavigating through the Tone Controls’ OSD menu via a combination of[ENTER] and [A/S/D/F] keys.Maximum and minimum values for all three Tone Control levels are ±10 dB.“Tone Defeat” gives one the choice of varying or completely bypassing thetone control section of the T 778. If “Off” (“Tone Active” in the front paneldisplay) is selected, the Tone Control circuits are active.Select “On” (“Tone Defeat” in the front panel display) to bypass the ToneControls effectively defeating the effect of the tone control circuits.NOTETone Controls options can be directly selected or changed using HTR 8’s[TONE] button with DEVICE SELECTOR set to AMP mode. Toggle [TONE]button to select “Treble”, “Bass” or “Dialog” and then use the [D/F] toadjust their respective levels. Press [TONE] again to save the settings andat the same time move on to the next parameter or exit the parametersetting altogether.OPERATIONCONFIGURING T 778 - MAIN MENU VIA ON-SCREEEN DISPLAY