PAGE 33INITIAL SETUP OPERATIONSelecting Display ModeSelecting Display modeSelect the appropriate screen type according to yourTV set; conventional size screen (4:3) or wide-screen(16:9).Selecting FLD BrightnessSelect the FLD brightness in front panel to yourdesired.16:9 Wide4:3 PanscanCut Off4:3 LetterboxPress the SET UP button, during stop mode.Press to select TV Aspect mode.4:3 Letterbox : The video material notformatted in the Pan & Scan style is played backin the letterbox style (black bands appear at topand bottom of screen).4:3 PanScan : Select when a conventional TVset is connected. The video material formattedin the Pan-Scan style is played back in that style(the left and right edges are cut off).16:9 Wide : Select when a wide-screen TV setis connected. Played in “FULL” size. (Setting thewide-screen TV to “FULL” mode is alsonecessary.)NoteTV mode selection function is not provided at thistime.Press to select FLD Brightness andpress to select the desired value andpress ENTER button.To exit SET UP menuPress RETURN or SETUP button.123Disc AudioRatingAudio OutputDisc Subtitle EnglishDisc Menu EnglishChangePasswordSpeaker OutputEnglishTV AspectTV Mode AutoFLT Brightness 100%Two ChannelPCM onlyTheatrical4:3 LetterBoxDisc AudioRatingAudio OutputDisc Subtitle EnglishDisc Menu EnglishChangePasswordSpeaker OutputEnglishTV AspectTV Mode AutoFLT BrightnessTwo ChannelPCM onlyTheatrical4:3 LetterBox100%Disc AudioRatingAudio OutputDisc Subtitle EnglishDisc Menu EnglishChangePasswordSpeaker OutputEnglishTV AspectTV Mode AutoFLT BrightnessTwo ChannelPCM onlyTheatrical4:3 LetterBox100%At the SET UP screen