NAIM MU-SO Reference Manual

Also see for MU-SO: Short guide Reference manual Quick start guide Quick start guide Quick start guide

NAIM MU-SO Reference Manual Manual pdf 8 page image

62. Network Connection2.1.4: Wireless Setup Using a Wireless ConnectionWhen not connected to a local wireless network, mu-socan broadcast its own wireless signal that can be used toaccess its internal web setup page. The name and passwordof the wireless network you wish mu-so to connect to canbe specified on the setup page. To access the mu-so setuppage wirelessly follow the steps below.• Using the pin-tool supplied with mu-so, or astraightened paper clip, briefly press the pin-holebutton located on the mu-so right-hand side panel.The indicator located next to the pin-hole button withchange colour and flash.• The mu-so wirless network broadcast will switch offafter 30 minutes. It can be re-started by pressing thepin-hole button again.Open the computer, laptop, tablet or smart phone wirelesssetup page or control panel and look for a local wirelessnetwork called (Mu-so-XXXX-Setup). This is a wirelessnetwork generated by mu-so itself that enables temporaryconnection for setup purposes.Note: The default mu-so network and Bluetooth nameincorporates the last four characters of the unique MACaddress printed on a label on the underside of each unitadjacent to the mains input socket.Select the mu-so wireless network and connect to it. Nopassword will be required.Note: Windows may require confirmation of network type.Select “Home”.• Close the computer, laptop, tablet or smart phonewireless setup page or control panel.• Open a web browser window on the computer, laptop,tablet or smart phone and type 192.168.1.12 in theaddress bar. Press return or select “Go”.• The browser will display the mu-so Setup page. Selectmu-so Wireless Setup and type your wireless networkname and password in the appropriate dialogue boxes.Select Enter. Diagram 7 illustrates the mu-so Setuppage home screen.• Close the browser window.• Return to the computer, laptop, tablet or smart phonewireless setup page or control panel and re-connect toyour local network.• Disconnect and then re-connect mu-so to the mainspower supply and wake it from standby by touching itsdisplay Standby icon or pressing the handset Standbybutton.• After a few moments your mu-so should be availablefor wireless streaming on your home network. Themu-so side-panel indicator will illuminate white.Diagram 7Setup web page - Overview