5nac 52 operationpower suppliesThe nac 52 does not incorporate an internal power supply and can be used only in conjunction with asupercap power supply.listening and recordingThe input selector buttons are arranged along the uppermost bank of buttons. They control whichsource is to be routed to the power amplifier and the loudspeakers, for listening. Below them, in thelower bank, are a corresponding array of buttons which choose the source component to be routed tothe preamplifier’s recording outputs. One component (for example, the record player) can therefore belistened to whilst the output from another (say, the tuner) can be recorded onto a tape recorder. It ispossible to lock the record controls and prevent accidental de-selection during recording. Record-lockis switched on or off by depressing the source mono button four times within six seconds.mute and mono facilitiesTo the left of each bank of buttons there are two further buttons labelled mute and mono. These workindependently: for example the mute button in the lower (recording) bank does not affect the signalthat is chosen via the upper (source) buttons, and vice versa. Operating the mono button on the sourcebank will not affect the record circuits. To select either function press the relevant button once. Tocancel that function press the button again.preamplifier inputsInput 1 is a high level input, but can be converted into a phono input by fitting plug in boards. Pleasesee your dealer for further details.Input 2 is a standard high level input. Before using, see the section “input socket 2” below.Input 3 is a standard high level input.Inputs 4, 5 and 6 are standard high level inputs and also have record output facilities, so these shouldbe assigned to your tape recorder, cassette deck or VCR.input socket 2 to expand input capabilitiesPlease note that input 2 is provided with two sockets. Use socket 2a for connecting your usualancillary equipment. The extra socket (2b) is for the Prefix or Stageline phono stage. Only one of thesesockets may be used at a time, for safety as well as performance. Your preamplifier will have aprotective cover fitted over the extra socket. If you wish to use it, it is advisable to refit the protectivecover over the socket that will now be unused, to prevent mistakes.remote controlFor operation of the nac 52 using the NARCOM 2 remote handset please see pages 18 and 19