Model Code NK-125MASuitable Blade 115-125mm T1.5-2.2mm Diamond Blades.Cut Depth 5-25mm (125mm Blade) 5-20mm (115mm Blade)Weight 690g (Main Unit with adaptor system)Work material Concrete, Block, and Tile.Suitable Makita / BOSCH / Dewalt / Milwaukee / Metabo / HiKOKI / FLEX 115-125mm class small angle grinder.Angle GrindersDust Extractor for 115-125mm Diamond BladeINSTRUCTION MANUALWARNINGSPECIFICATIONSN300289_Rev1INSTALLATION-1-・DO NOT use NK-125MA with the angle grinder which can NOT be fitted correctly as instructed in this manual.・NK-125MA is only for cutting concrete, block, and tile. DO NOT use for cutting steel or other materials.・NK-125MA must be used with the Vacuum suitable for the concrete dust.・NK-125MA is only for 115-125mm Diamond cutting blades. DO NOT use with abrasive wheels or tipped saw blades.・Always check NK-125MA for damage, cracks, or deformation before use.・DO NOT use NK-125MA if it is cracked, damaged or bent as this could lead to injury.・Be sure to wear the protective goggles, dust mask, protective foot wear, earplugs and other protective equipment when working.・Keep NK-125MA away from gasoline, solvents, and paraffin.・Ensure the cutting material securely clamped before cutting.[a] Main Unit / [b] Adapting Unit / [c] Bolt / [d] Wrench / [e] Offset Plate / [ f ] Milwaukee Plate[g] Base Flange / [h] Spacer T9.5 / [ i ] Spacer T7 / [k] Spacer T6 / [m] Joint / [n] Washer / [p] HookExplanationof the pictograms.Read the operatinginstructions before use.Weareye protection.Wearbreathing protection.Wearear protection.Wearprotective gloves.GeneralWarning.OVER VIEWNK-125MAGuardGrinder※Based on the webas of 2022 Jan.[a][b][c][d][g] [h] [ i ] [k][e][n] [p][m]Separate [a] and [b].[ f ]Check theInstallation Guide.Check the instructionvideo at this QR code., GA5050R type1. Detach the Guard from the grinder.DWE4056 / 4057, DCG405P2 / 406N /409NT / 416N typeWPB18LTXBL125 / WB18LTXBL125 /WP18LTX125 / W18LTX125 / WEV1500-125 / WE1500-125 typeDCG405P2 /406N / 409NT /416N seriestype only.Above grinder needs its lever and related components detached.(2 sets)MetaboWEPBA17-125 / WEBA17-125 / WEA17-125 /WEVA15-125 / WA13-125 / WEA11-125 typeWPB13-125 / WB18LTBL11-125 / WVB18LTBL11-125 / WPB18LTBL11-125 typeSub Plateis requiredseparately.Makita / BOSCH : X-LOCK typeDewalt : D28137/ DCG405FN typeMilwaukee : AGV10-125EK,AG10-125EK,AG800-125EK typecan NOTbe fitted. HiKOKIG13SB4, G13SE3, G13BAWQZ, G13BY, G13YG typeWEPBA17-125 / WEBA17-125 / WEA17-125 /WEVA15-125 / WA13-125 / WEA11-125 typeWPB13-125 / WB18LTBL11-125 / WVB18LTBL11-125 / WPB18LTBL11-125 typeSub PlateSold SeparatelyG13SB4, G13SE3, G13BAWQZ, G13BY, G13YG typeLarge Flangeis required separately forthe "Large Flange" modelson the right.