Model Code NKC-125MASuitable Blade Ø100~125mm (h21mm) Diamond Grinding Cup WheelWeight 470g (Main Unit with adaptor system)Cut material Concrete, Block.Suitable Makita / BOSCH / Dewalt / Milwaukee / Metabo / HiKOKI / FLEX 115-125mm angle grinder.Angle Grinders ※Makita / BOSCH : X-LOCK model can't be fitted.※Dewalt : D28137, DCG405FN can't be fitted.※Milwaukee : AG10 / AGV10 series can't be fitted.[Makita]40Vmax series, GA5050R.[Dewalt]DWE4057,DCG405P2 / 406N / 409NT / 416N[Metabo]WPB18LTXBL125 / WB18LTXBL125WP18LTX125 / W18LTX125WEV1500-125 / WE1500-125 seriesDust Extractor for 100-125mm Diamond Grinding Cup WheelINSTRUCTION MANUALWARNINGSPECIFICATIONSN300290INSTALLATIONFig.11. Detach the Guard from Angle Grinder. (Fig.2)2. Some models need its Lever detached. (Fig.3)-1-・DO NOT use the NKC-125MA with the angle grinder which can NOT be fitted correctly instructed by this manual.・NKC-125MA is only for grinding concrete and block. DO NOT use for grinding steel or other materials.・NKC-125MA must be used with the Vacuum suitable for the concrete dust.・NKC-125MA is only for 100-125mm Diamond Grinding Cup Wheels. DO NOT use with abrasive wheels.・Always check the NKC-125MA for damage, cracks, or deformation before use.・DO NOT use the NKC-125MA if it is cracked, damaged or bent as this could lead to injury.・Be sure to wear the protective goggles, dust mask, protective foot wear, earplugs and other protective equipment when working.・Keep NKC-125MA away from gasoline, solvents, and paraffin.・Ensure the work piece is securely clamped before working.[a] Main Unit / [b] Lock Nut / [c] Flange / [d] Spacer T12 x id16 &14.3 / [e] Spacer T10 x id14.3[ f ] Spacer T7 x id14.3 / [g] Joint / [h] Wrench (L) / [ i ] Wrench (S) / [k] Sub Plate / [m] Offset PlateExplanationof the pictograms.Read the operatinginstructions before use.Weareye protection.Wearbreathing protection.Wearear protection.Wearprotective gloves.GeneralWarning.OVER VIEWNKC-125MAFig.2 Fig.3Some models ONLY.[a]LeverGuardAngleGrinderCheck the instruction videoat this QR code.Refer to the attached sheet for details.※Based on the webas of 2021 Sep.[b][c][d][e][ f ][g][h][ i ][ m ][ k ]