7. OPERATING THlS MACHINE7-4-5 MONITOR TESTThe MONITOR TEST performs various adjustments on the monitor.(See P-55, 8-3-l (3) “Adjusting the monitor.“)0 While on the MENU screen, select MONITOR TEST and press the enter switch. The ,MON&TOR TEST screen will then appear..- >MONITOR TESTGRADATION P A T T E R NCROSSHATCH PATTERN (CRT)CROSSEATCR PATTERN (PRO.3EcToR) - -W-SITE WINDOW CR) I:;WHITE WINDOW (M)WIiITEwINDoW (L) C'INTERLACE PATTERN (9)VIEW ANGLE ADJUST (CRT) WVTEW ANGLE ADJUST (PROJECTOR)FULL WRITEEXITSTLECT SW:CHOOSE ENTER SW:!ZNTSR(0(i)MONITOR TEST screenq With the select switch, choose an option. The selected option will blink.H Press the enter switch to display the corresponding pattern. To get out of the pattern screen,press the enter switch again.(a) Displays a gradation pattern.(b) Displays a crosshatch pattern for CRT monitor. (This is not used for projectors.)(c) Displays a crosshatch pattern for projectors. (This not used for CRT monitors.)(d) Displays the white window (H, or high).(e) Displays the white window.(M, or medium).(f) Displays the white window (L. or low).(g) Displays an interlace pattern.(h) Displays an adjustment screen for CRT monitors. (This is not used for projectors.)(i) Displays an adjustment screen for projectors. (This is not used for CRT monitors.)(j) Displays white all over the screen.q Select EXIT and press the enter switch to go back to the MENU screen.38