NAPCO EXPRESS XP-600 User Manual

Also see for EXPRESS XP-600: User manual Installation instructions Datasheet User guide User guide

Contents

NAPCO EXPRESS XP-600 User Manual Manual pdf 15 page image

15Ambush Code - In the event that youare forced by an intruder to disarm yoursystem, this special code can be used todisarm the system, and simultaneouslysend a silent alarm to Central Station. Ifyour system has the Ambush feature en-abled, the code assigned as the User 6code will function as your Ambush Code.Arming / Disarming - Turning the sys-tem on or off by entering your user codeat the keypad.Auto Interior Bypass - A feature whichallows the system to recognize whenyou have not left the premises and auto-matically bypass any interior zones, de-activating devices such as motion sen-sors, allowing free movement throughoutthe premises.Battery - A backup source of power toprovide protection for a limited time inthe event of a power failure.Bypass - the manual or automatic re-moval of one or more protection zonesfrom the system. Press C and thenthe zone number to bypass a zone.Central Station - Monitors alarm, emer-gency and trouble reports from the alarmsystem and notifies proper authorities.Chime - a keypad beep which indicatesthat a door has been opened while thesystem is disarmed.Easy Exit - Allows an occupant to leavethe premises without disarming the sys-tem. Pressing A and then 0 whilethe system is armed will permit exit byremoving the protection on the Exit/Entrydoor for 3 minutes.Exit/Entry Delay - The amount of timeyou are allowed to enter and leave thepremises when the system is armed.Exit/Entry Zone - A zone which will al-low you to enter and leave the premiseswhen the system is armed.Instant Protection - Arming without En-try Delay while remaining on the prem-ises. (Press A 4 while armed).Keypad Sounder - A local warning de-vice at the keypad to alert that Entry de-lay has started.System Trouble - A problem has beendetected in the system which may pre-vent it from working properly. TheHSYSTEM light will be lit.User Code - A four digit code which isused to arm and disarm the system fromthe keypad.User 1 Code - A four digit code whichcan be used to program, re-program anderase user codes, as well as arm anddisarm the system from the keypad.Zone - An area which is protected by asecurity device. Your front door may bedesignated as Zone 1, while the livingroom motion detector may be Zone 2.Refer to the Zone Label on your keypadfor the Zone Identification of your sys-tem.Glossary

/ 16

Related manuals for NAPCO EXPRESS XP-600