NAPCO F-TPBR Manual 

Also see for F-TPBR: Installation instructions

Contents

NAPCO F-TPBR Manual  Manual pdf 14 page image

14Your NAPCO Freedom Security System is constantly monitoring its own components, as well as all critical services, such as AC powerand the telephone line, to insure that it is always ready to provide the protection for which it was designed. When a system trouble occurs,the F-TPBR Touchpad will caution you with a Trouble TBL light and a beeping sounder.If you cannot immediately fix the trouble, the system can still be used. Simply press DISARM/SILENCE to view the trouble as de-scribed below and press DISARM/SILENCE again to exit the VIEW TROUBLE mode. The system can now be armed.To view the trouble, press DISARM/SILENCE, count the number of Trouble TBL and READY flashes and refer to the following table. Ifthere is more than one trouble to view, press DISARM/SILENCE again to scroll to the next trouble, and again to exit the VIEW TROUBLEmode. The Trouble TBL light will remain pulsing as a reminder if the trouble is still present. NOTE: If F-TPBR Touchpad siren chirps onceevery 10 seconds, call for service.SYSTEM TROUBLE ERROR CODESTBL Flashes /Touchpad beepsREADYFlashes Trouble Condition ActionSTEADY NONE Zones Bypassed This is a reminder that zones have been bypassed (by pressing BYPASS). If it isnecessary to bypass any inoperative zones, it is important to have the zones re-paired as soon as possible.1 NONE AC Power Failure This trouble will occur if AC power is not present. Make sure the system trans-former is plugged into its AC receptacle and check the circuit breaker, otherwisecall for service.2 NONE Low Battery If there has been a recent power failure, the battery may be partially depleted andmust be recharged by the control panel. If the trouble does not clear in 24 hours,call for service.3 NONE CommunicationFailureThe system was not able to report to central station. If this is due to a temporaryinterruption in the telephone service, the trouble can be cleared when the service isrestored by pressing DISARM/SILENCE again.4 NONE Telephone Line Cut The telephone line has failed. If telephone service has been temporarily interrupted,the trouble will clear when restored. Otherwise, call for service.5 NONE Bell/Siren Trouble There is a problem with the Bell or Siren. Call for service.F-TPBR_OI308.06_USER_anc...page 14Friday, October 28, 2005 15:14Composite