NAPCO StarLink Connect Series Installation Instructions Manual

Also see for StarLink Connect Series: Getting started

Contents

NAPCO StarLink Connect Series Installation Instructions Manual Manual pdf 1 page image

StarLink™ Connect SLECDMA-CB Series Alarm Communicators -- Installation Instructions 1SLECDMA-CB-TF-C - Commercial / Residential Burglaryand Residential Fire Network Compatible CDMA alarmcapture radio communicator in white metal housing. In-cludes SLE-ULPS-R power supply and TRF12/T123plug-in 16.5V / 20VA transformer.ADDITIONAL COMPONENTSIn addition to the models listed above, thefollowing sub-assemblies are available:SLE-WIFI-MODULE - Allows your StarLink™device to connect to the Internet by means of a wireless(Wi-Fi) link, eliminating a wired Ethernet cable connec-tion.SLE-DLCBL - Download Cable, 6 feet.SLE-ANTEXT30 - Extended antenna with 30 feet of cable.SLE-ANTEXT50 - Extended antenna with 50 feet of cable.SLE-ANTEXT75 - Extended antenna with 75 feet of cable.(Any suitable external cellular antenna is permitted byUL). Always follow the manufacturer's installation in-structions. Note: Antennas are not Listed by UL. For3/4G radios where an External Antenna needs to beinstalled outside of the room in which the radio is in-stalled (maximum 30 meters (98 feet) in Residential ap-plications), please use RF Transmitter Board9GPS5320EXAPSLD available from our Customer Ser-vice Department, if not provided. The9GPS5320EXAPSLD is identified by "two red dots" lo-cated on the lower right corner of the board. SeeWI2222 included with the 9GPS5320EXAPSLD for thesimple installation procedure.SPECIFICATIONSThe following specifications apply to all StarLink radio mod-els in these installation instructions unless otherwise stated:Electrical Ratings for +12V (both models powered by thecontrol panel) Input Voltage: 10-15VDC (power-limited output from con-trol panel). Do NOT connect to full-wave rectified (FWR)power. Input Current:SLECDMA-CB-C standby current: 100mA (110mAwith telco EOLR)SLECDMA-CB-TF-C standby current: 100mA(110mA with telco EOLR)Transmission current (all models): 200mA max.Electrical Ratings for the IN 1 Burg/Fire Input: Input Voltage: 9-15VDC. Maximum Input Current: Up to 2mA from control panelsupply circuitWI2247ALF 8/18333 Bayview Avenue Amityville, New York 11701For Sales and Repairs, (800) 645-9445For Technical Service, (800) 645-9440 or visit us athttp://tech.napcosecurity.com/(Note: Technical Service is for security professionals only)Publicly traded on NASDAQ Symbol: NSSC© NAPCO 2018OVERVIEWThe StarLink™ Connect models SLECDMA-CB-C andSLECDMA-CB-TF-C are multi-function Commercial / Resi-dential Burglary and Residential Fire alarm radio communi-cators and supervised system interface modules. They pro-vide several options to the user:1. A monitoring path to a central station through a digitalCDMA radio and optionally through a TCP/IP network tothe Internet using a hardwired or optional Wi-Fi connec-tion;2. Notification alerts of alarm system changes to a mobiledevice. Notifications use iBridge Messenger SMS textmessaging and/or emails to inform the user and/or deal-er of system state changes. For this release, these noti-fications are enabled in the iBridge Connected HomeServices website at http://ibridge.napconoc2.com;3. Both radio models are compatible with most 12VDCalarm control panels, including Honeywell and DSC(always adhere to the documentation provided by thecontrol panel manufacturer). Residing in the WindowsSystem Tray, the StarLink Connect application allowsyou to use your customary control panel communicationsoftware for remote programming and communication: DSC DLS Honeywell Compass ®NAPCO control panels are programmed in the tradition-al way using PCD-Windows Quickloader software.StarLink Connect is available on the enclosed CD.If required, mount the unit to a single-, dual-, or three-gangelectrical box and route the wires through the back knock-out(s), or as specified by local codes. See WI2140 for pro-gramming instructions (all manuals are available fordownload at http://tech.napcosecurity.com/).StarLink SLE Series radios use proprietary data-capturetechnology that captures the alarm report from the controlpanel and transmits the alarm signals to the SLE ControlCenter (the Napco "NOC"); the alarm signals are then for-warded to ANY central station via Contact ID or Sur-GardSystem II or Sur-Gard System V central station receivers viaTCP/IP using standard line security. The SLE Control Cen-ter reports a trouble signal in the event that the network doesnot receive the expected supervision signal from the wire-less communicator. In addition, both StarLink radio modelscan be powered directly from the control panel.The StarLink radio model names are as follows:SLECDMA-CB-C - Commercial / Residential Burglary andResidential Fire Network Compatible CDMA alarm cap-ture radio communicator in white metal housing. Pow-ered directly from control panel (no power supply, notransformer).StarLink ™ Connect SeriesSLECDMA-CB-C & SLECDMA-CB-TF-CMulti-Function Alarm CommunicatorsINSTALLATION INSTRUCTIONS