NAPCO VIP-Gateway Installation Manual
                    | |
2VIP-GATEWAY Features4 video inputs, accepts any analog CCTV camera.1 channel video output, NTSC or PAL.1 trigger input per channel to trigger transmission of video for archiving onVideoAlert.net server. (Note: 1 additional trigger in and 1 additionaltrigger out is available on the power supply connector assembly.)Programmable trigger on video motion detection.Built-in motion detection scan time x 4 channels: 1 second. (approx. 250mS x channel)14 seconds of pre-alarm images per channel.Adjustable image size: 640x480, 320x240 and 160x120 Setup up throughactive-X server application.Dynamic IP support (without the need of any 3rd party addition or service)via built InfoServer DNS technology.RJ45 GATEWAY is designed for 10Mbps Ethernet networks. GATEWAYconnects to the network via UTP (Unshielded Twist Pair) Category 5cable.Power & Trigger I/O GATEWAY adopts unique RJ12 cable for power sup-ply. The special featured RJ12 cable includes input/output (I/O) func-tion. Simply connect the input/output cable to desire device and nohardware jumper on camera is required.Video out and video in 1 channel NTSC or PAL video output, can connectwith PC and televisions, 4 channelNTSC or PAL video input available, turn analog video cameras into IPcameras.NTSC Local Video Output with Switching: Selectable “dwell time” via Webinterface for local viewing or distribution.Local Video Output Latching - Video from cameras 1-4 may be latched tothe Video Output by shorting input triggers 1b - 4b respectively.Transmission Protocol: UDP. UDP Port used: Port 80 or any above 1000.Dimensions 4 7/8 x 8 1/4 x 1 1/2(H x W x D), InchesInput Voltage: 5VDC via 120VAV to 5VDCTransformer (supplied)Current: 600mA(Transformer rating)VIP-GATEWAY SPECIFICATIONSVIP-GatewayX: Includes:VIP-Gateway internet CCTVadapter modulePower Adapter3’ CAT5 cable.G-BOX Includes:G-BOX Internet Interface forVIP-Gateway.Power Adapter3’ CAT5 cable.VIP-GatewayX/24: Kit Includes:(1) VIP-GatewayX(1) G-BOX(24) month VideoAlertServer serviceORDERING INFORMATIONG-BOX SPECIFICATIONSDimensions 5 5/16 x 3 9/16 x 1 1/8(H x W x D), InchesInput Voltage: 9VDC via 120VAV to 9VDCTransformer (supplied)Current: 180mA Max (all 4 LAN ports inuse)Table of ContentsFeatures and specifications ..............................2System Overview ...............................................3Installation Overview..........................................4Gateway Terminals and Connections ................5Wiring the Trigger Inputs....................................6Armed Trigger Input ...........................................6Connecting to G-BOX & Internet........................7G-BOX LED Indicators .......................................7Configuring the Gateway ...................................8Advanced Settings .............................................9Account Activation............................................12Entering Subscriber Details .............................13Video Inbox ......................................................14Adding New Users ...........................................15Frequently Asked Questions ............................16NAPCO Limited Warranty ................................20NAPCO Security Systems, Inc .333 Bayview Avenue, Amityville, New York 11701For Sales and Repair, call toll free: (800) 645-9445For direct line to Technical Service, call toll free:(800) 645-9440Internet: http://www.napcosecurity.comWindows ®, and the Windows logo are registered trademarks of Microsoft CorporationApple ® and the Apple logo are registered trademarks of Apple Computer, Inc.Linux ® is a trademark of Linus Torvalds. The Linux penguin logo was created by Larry Ewing. |
Related manuals for NAPCO G-BOX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine