NASdeluxe NDL-2400R-R User Manual
Also see for NDL-2400R-R: Quick installation guide
                                                                                              | |
Contents
| 
NASdeluxe NDL-2400R iSCSI/NAS System - Manualwww.NASdeluxe.comPage 75https://www.NDL-2400R.dyndns.orgb. You should see the login page of NDL-2400R.Firewall Software ConfigurationIf you are using a software firewall (i.e. Norton Internet Security) and are havingtrouble connecting to the NDL-2400R, you can try the following steps:1. Double click the NIS icon on system tray, and then configure thePersonal Firewall.2. On the Programs page, find the SetupWizard.exe and change itspermission to "Permit All". If it's not in the program list, use the Add orProgram Scan buttons to find it.3. On the Networking page, manually add NDL-2400R IP address (i.e.192.168.1.100) to the Trusted list.Replacing Damaged Hard DrivesIf you are using RAID 1, RAID 5, RAID 6, or RAID 10, you can easily replace adamaged hard drive in the NASdeluxe NDL-2400R while keeping your data securewith the system’s automatic data recovery.Hard Drive DamageWhen a hard drive is damaged and data in the RAID volume, the system LCD willdisplay warning message also the system beeps.Replacing a Hard DriveTo replace a hard disk drive in the NDL-2400R:1. Remove the tray with the damaged hard disk.2. Unscrew the damaged hard disk and remove it from the tray.3. Slide a new hard disk into the tray and fasten the screws.4. Insert the hard disk tray back into the NDL-2400R until it snaps into place.You can also lock it with a key if desired.5. The LED blinks green when the HDD is accessed.RAID Auto-RebuildWhen using RAID 1, 5, 6, or 10 on the NDL-2400R, you can use the auto-rebuildfunction when an error is detected.1. When a hard disk fails the system beeps and/or an email notification issent to specified receivers.2. Check the LCD to see which disk has failed.3. Follow the steps mentioned above to replace the failed hard disk.4. The system automatically recognizes the new hard disk and starts theauto-rebuild sequence to resume its status before the hard disk crash. |
Related manuals for NASdeluxe NDL-2400R-R
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine