NAUTICAST Product Manual
                    | |
Page 13 of 20 W1 Product Manual 1.33 Connect your Nauticast B23.1 Nauticast B2 Data CableFor the connection of the Nauticast B2 to the Nauticast W1 you can use either data cableP/N 3001004 or P/N 3001012. Connect the RS232 plug to the Nauticast W1. The complete serialinterface settings are already set up correctly for this use case.To use the RS422 interface, please see the instructions in section 1.2.3.2 RS422/RS485Conncetion. Please be aware, the RS422 interface works with 38400 Baud, therefore you need tochange this in the settings of the Nauticast W1, see section 2.1.4 Serial Interface options Fehler!Verweisquelle konnte nicht gefunden werden.for more details. We recommend using theRS232 interface on first installation, as it allows for a simpler connection. After setup both optionswill work equally well.3.2 Link2AISIf you’re using a PC to connect, you can use the Link2AIS application (included in the USB datacard that comes with the Nauticast B2 or the NauticastW1) out of the box. Just use the following settings in themenu “System Settings – Connection”:Data Source: TCP ConnectionTCP/UDP SettingsIP: 192.168.1.100PORT: 100For a UDP connection please choose:Data Source: UDP ConnectionTCP/UDP SettingsPORT: 100Note: If you have set the Network Type to “Infrastructure”and have the IP address assigned with DHCP, the IP-address will differ. See 2.2.2 Infrastructure Network Typefor more details.Click “Save” and the connection will be established.To ensure a proper connection, you can open the menu“View – Monitor Interface”, where you can see thecommunication in clear text. For analytical purposes thedata stream may also be saved to a file. |
manualsdatabase
Your AI-powered manual search engine