NAVICOM RT-550 Owner's Manual
                     | |
6.9 DSC SETUPThe submenu is used to set behavior of the DSC/ATIS function.The following 6 items are available for selection.User MMSIGroup SetupATIS MMSIATIS ENABLEDSC ENABLEPOS REPLY6.9.1 ENTER YOUR USER MMSI (USER MMIS)This is a once-only operation.You must enter your user MMSI first then you can access the DSCfunctions.1 Select DSC SETUP then USER MMSI and press the CH knob. If anexisting MMSI is stored, the values appear.2 If the MMSI is blank, a dashes line appear. Enter user MMSI alongthe dashed line. Press the CH knob to confirm each correct entry tomove to the next digit.If your make an error, press +/- key or rotate CH knob. < appears,then press the CH knob to backup and correct the entry.Hold the CH knob to store your user MMSI.43Enter your user MMSI again as a password check, hold the CH knob topermanently store the your user MMSI and return to the menu.5 You can view your stored user MMSI at anytime by selecting user MMSIin the DSC SETUP menu.6 If there is no USER MMSI stored and the radio's DSC function isattempted, the radio says "PLEASE INPUT USER MMSI" as below.DSC WARNING MESSAGE31 326.9.2.2 EDIT USER GROUPS12Select DSC SET/UP then GROUP SETUP and press the CH knob. Theexisting names & MMSI data are displayed on screen. Select the Groupname or, only the MMSI that you wantedPress the CH knob to edit. The entry procedures are same as that of theBUDDY LIST3 when the edition is finish press the CH knob to store the changes andreturn to the GROUP MMSI screen.INPUT USERMMSI> - - - - - - - -USER MMSIINPUT AGAIN> - - - - - - - -PLEASE INPUTUSER MMSI6.9.2.3 DELETE A GROUP1 Select GROUP SETUP and press the CH knob. The existing groupnames are displayed on screen2 Select that you wanted delete and press the CH knob will displayEDIT or DELETE item3 Select DELETE and press the CH knob will display DELETEGROUP menu arrow point the YES, then press the CH knob toempty the group and return to the GROUP SETUP screen. The LCDdisplays the group as follow.GROUP SETUPMANUAL NEW> EILEENFRIENDSEDIT NAME>EILEENEDIT MMSI053421608EILEEN053421608>EDITDELETE6.9.2 MAINTAIN GROUPSYou can program up to three group MMSI numbers and associated Groupnames, group MMSI numbers always begin with a zero (0). You only enter thelast 8digits of the group ID number, the intial "0" is automatically entered.6.9.2.1 ENTER YOUR GROUPS1 Select GROUP SETUP and the cursor is at <MANUAL NEW>. If anexisting names & MMSI data are stored, the values appear.2If is blank, Only MANUAL NEW appear on LCDThe entry procedures are same as that of the BUDDY LIST.DSC SETUPUSER MMSI>GROUP SETUPATIS MMSIGROUP SETUP>MANUAL NEWEILEENGROUP NAME> - - - - - - - - - -GROUP MMSIO - - - - - - - -USER MMSI500000001>STORECANCELNavicom RT-550 Navicom RT-550 |
Related manuals for NAVICOM RT-550
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine