25 265.2.4 MAKE A ROUTINE CALL (INDIVIDUAL)You can make an individual call, either to a ship or to a boast station.5.2.4.1 MANUALLY SENDING AN INDIVIDUAL CALL1) Press DSC /MENU to DSC mode, then select “NEW CALL”. Press theCH knob The arrow is pointing to 2) Rotate the CH knob to select: SAFETY, press the CH knob the arrowis pointing to 3) Press the CH knob again access manual enter ID screen, enter theMMSI number using the CH knob, when MMSI entry is complete,press the CH knob to accept the selection4) Then rotate the CH knob to select the working channel and press theCH knob to accept select.(Only in the case of a call to a ship, it is permitted to enter a talk channel;a call to a coast station, the coast station will specify the channel to talkon in its acknowledgement.)5) The radio summarizes the call details and asks for confirmation tosend the call (send?).6) Press the CH knob again to send the call. The radio goes to CH 70and the icon-T is displayed on the screen while the DSC call is beingsent, then LCD display an awaiting acknowledgment.7) If the call is acknowledged (ACK), press PTT to talk8) If the call does not get with in 30 seconds, the radio prompts you toresend the call.9) If you do nothing for 5 minutes, the individual call cancelled and theradio revert to the original channel.5.2.4.2 SENDING AN INDIVIDUAL CALL (MMSI STROED IN BUDDY LIST)1) Press DSC /MENU to DSC mode, then select “NEW CALL”. And nextselect one of categories from new call menu. Press the CH knob, thearrow is pointing to 2) Rotate the CH knob select the person of the Buddy list that you wantto call. The procedures are as same as manual send an individual call.5.2.4.3 ACKNOWLEDGEMENT OF AN INDIVIDUAL INCOMING CALLThe EUR requires the operator to manually send an acknowledgement to therequesting radio. Press CH knob to send an acknowledgement or CANCELbutton to cancel.The USA will automatically send an acknowledgement to the requesting radiowithin 10 seconds of receiving the call.5.2.5 LAST CALL (RECALL THE MOST RECENT INCOMING CALL)This facility also is useful and is used frequently as routing individual call1) Press the DSC / Menu button to enter the DSC mode LAST CALL will bepointed, press CH knob to display the detail information of the last call2) Select the working channel for individual call and press CH knob, the radiosummarizes the call details and ask for confirmation to send the call(send?). Press CH knob to send the call other operation as same as thesection 5.2.4.15.2.6 SEND CALL USING THE CALL LOGThe CALL LOG contains the contact details for the 20 most recent incomingcalls, so you call any of them again quickly1) Press the DSC / Menu button to enter the DSC mode, select CALL LOG,Rotate the CH button to scroll for previous call.2) Press the CH knob to conform the choice then follow the as the ways tomake the call in 5.2.4.13) You can choose SAVE MMSI to store the vessel MMSI from the call log5.2.7 SEND CALL USING THE DISTRESS LOGTotal max.10 distress call data could be stored; the oldest one will be erased.The feature is similar to CALL LOG function, but selects the caller from theDistress Log.DSC CALLLAST CALL>NEW CALLGROUPINDIVIDUAL>NEW CALLROUTINE> SAFETYURGENCY450078964INDIVIDUALSAFETYWAITING ACK450078964SEND AGAIN>YESNOPILOTAGE21º22.0012N120º40.1001E10:15 UTC450078964INDIVIDUALSAFETY>SEND?450078964INDIVIDUALSAFETY>SET CHANNELMANUAL IND0- - - - - - - -
