11Understanding EventsEvents are scheduled times when a relay or group of relays are turned on or off.They are defined by the user by time: Year, Month, Day of Month, Day of week,Hour, Minute, and Second. By having these options you have the ability ofswitching relays on or off at very specific times. They are also defined by howthey control the relays, whether they turn a relay or group of relays on or off.You can add up to 999 Events to the list.First we will talk about defining the time of an Event. When determining time,the hour, minute, and second are required information.. These parameters must beentered. If only these parameters are filled, then he event will occur every singleday at this time. However, you can fill in the Day of Week box so the event onlyoccurs on a certain day of the week such as Monday. You must check the boxnext Day of Week Much Match to Trigger Event for this parameter to take effect.By filling in the rest of the parameters you can have an event only occur onDecember 25 2012 at 1:53.45 PM on that exact second.Secondly we will talk about what the Event does, it controls relays. You can selectexactly which relays in which banks (group of 8 relays) you want to come on orturn off when the event is triggered.