NCE Power Cab Owner Reference Manual
                                                                       | |
Contents
| 
26To select a locomotive for operation:l Press the SELECT LOCO buttonl Enter the 1 to 4 digit address of the loco/consist to be operated. A “LeadingZero” is necessary for long addresses below 128. An asterisk will be displayedbefore any long address below 128 (example below).l Press the ENTER key.Locomotive address examples:4421 = Long Address006 = Long Address as entered.*006 = Long Address as displayed45 = Short Address as entered045 = Short Address as displayedLOC: will be displayed when addressing a single locomotiveCON: will be displayed when addressing a Consist.CONTROLLING HEADLIGHTS ANDOTHER DECODER FUNCTIONSPressing HEADLIGHT will alternately toggle the headlight of the locomotive on andoff.To toggle other functions simply press the number key that corresponds to thefunction you wish to control. E.g. - The ‘1’ key controls function 1.Your cab will display which functions are on and off on the lower right of the display.The letter ‘L’ stands for Headlight (Function 0) and numbers 1-6 stand for functions1-6 (functions 7 through 12 are not displayed on the cab but work if you push thebuttons). In the example below the headlight plus functions 2 and 6 are on.LOC:4449 xx:xxPMLOC:4449 xx:xxPMLOC:4449 xx:xxPMLOC:4449 xx:xxPMLOC:4449 xx:xxPMFWD:02 L-2---6FWD:02 L-2---6FWD:02 L-2---6FWD:02 L-2---6FWD:02 L-2---6 |
Related manuals for NCE Power Cab
manualsdatabase
Your AI-powered manual search engine