NCI 6720 User Manual

Also see for 6702: User manual User manual

Contents

NCI 6720 User Manual Manual pdf 13 page image

Model 6700 Family User’s Manual 13The Diagnostic (DIAG) mode menu allowstesting of specific areas of the scale’s functionand viewing current configuration settings. Thisincludes the following:DISPLAY (DISP) – Shows the version andrevision of the software, followed by a displaysegment test.RAM (RA) – Performs a nondestructive test ofRAM in the processor.ROM (RO) – Performs a checksum of all loca-tions of ROM in the processor.INPUT/OUTPUT (I/O) – Data is output by thescale and through the use of a loopback connec-tor. The data is immediately read back into thereceive channel and verified against what wassent. Requires a jumper (short) between transmitand receive data lines.DIVISION TEST, w/AZT (DIV-A) – Weight datais normalized to 100,000 counts of displayedresolution. AZT (Auto Zero Tracking) is enabled.DIVISION TEST, w/o AZT (DIV-N) – Weight datais normalized to 100,000 counts of displayedresolution. AZT is disabled.Viewable configuration settings include:LN FR Line frequencyFILT Filter settingPROT Serial protocolBAUD Baud rateCAP Scale capacityUNITS Unit of measureDiagnostics ModeDiagnostic (DIAG) ModeTip: Easy access tothe diagnostic mode isavailable directly fromthe front panel withoutopening the scale toaccess the Menumode switches. SeeSetup Review/Testsection.