7167 Owner’s Manual Appendix A: SpecificationsNovember 2002 213Thermal Receipt Station Impact Slip StationPaper Diameter 80 mm Max. Not ApplicablePaper Length 83 Meters (273 feet) Side Insertion: 2.0 Inches (Min.)Front Insertion: 2.75 Inches (Min.)Paper Width 80 mm ± 1mm(3.15 Inches ± .02 Inches)Side Insertion: 8.0 Inches (Min.)Front Insertion: 2.0 Inches (Min.)Paper Thickness Not Applicable .406 mm (.016 Inch)Printable Area 2.83 Inches (Max.) 3.22 Inches (Max.)Power RequirementsThe 7167 printer receives power from a separate power supply. Here are the voltagerequirements for the power supply.Maximum CurrentVoltage Station Short Term Long Term24.0 V ± 10% Slip 4.6 Amps 3.15 AmpsReceipt 6.5 Amps 3.15 AmpsEnvironmental ConditionsOperating Temperature 5°C to 45°C (40°F to 112°F), models with knife5°C to 50°C (40°F to 120°F), models with no knifeOperating Humidity 5% to 90%Condensation may occur when equipment is transferred from cold towarm areas after shipment. The printer's design permits operation afterdrying out and stabilizing at room temperature.
