4-6 Chapter 4: Operating System Recovery7. Run the MicroTouch screen calibration from the Desktop icon.Completing the OS Installation (WinXPe)The system automatically reboots when the image recovery is completeand starts the software installation. This installation also installs mostof the additional software and drivers that are included in the diskimage. Complete the installation as follows.1. Click the Admin button to login as Administrator.2. Read the EULA (End‐User License Agreement) information in theDOS window, then type EXIT and press Enter to close the DOSwindow.3. Start the Network Setup Wizard.4. Select options to identify the network information for the terminalenvironment.5. Enter the Computer Description.6. Enter the Computer Name.7. Enter the Workgroup Name.8. When prompted, press Finish to reboot the terminal.9. Log in when prompted.10. Open the Control Panel or use the TouchWare Icon on the desktopand run the MicroTouch screen calibration.Completing the OS Installation (WinNT)The system automatically reboots when the image recovery is completeand starts the software installation. This installation also installs mostof the additional software and drivers that are included in the diskimage. Complete the installation as follows.1. After the terminal reboots, press Next at the Windows Setup screen.
