NCR Columbus 800 User Manual
                                                                        | |
Contents
| 
NCR Orderman Columbus800 User Guide V01.00 Using the Recovery ToolOrderman GmbH (Part of NCR Corporation) 5711Using the Recovery Tool11.1 Main ScreenThe Access to the Recovery Tool is password protected. Password: Recovery1234 (Password is case sensitive)After the Columbus Recovery Tool is loaded you will see the main screen where you can select andstart the different functions via a touch on the specific button.Fig. 60: Recovery Tool Main Screen11. Check and Repair Disk – By pushing this button the system starts to run checkdisk.Checkdisk will check the consistency of the SSD and also the Windows filesystem. It canhappen that Windows itself will create a failure in the Windows filesystem and that Windowswill not start. Checkdisk will analyze this failure and fix this failure in the most cases.2. Save or Load Image –This opens the dialog screen for the Backup and the Recoveryfunction.3. Change Settings – Via a touch on this button the screen for changing the settings opens.The following parameters can be modified: Set and change Password to enter the recovery tool Setup the Networking Settings – Default network share name and Login4. Shutdown or Reboot – Opens the shutdown and reboot screen5. System Information Box – Shows system Information123452 |
Related manuals for NCR Columbus 800
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine