21Cirrus LT Manual-1.1b-090814Connecting to a Mouse and KeyboardUsing a mouse in the dedicated mouse port ensures full functionality when con-nected to a remote host and when you pull up the OnScreen Menu. The same ap-plies for the dedicated keyboard port.To connect to an external mouse:• Plug the mouse into the USB port with the picture of a mouse over it.• To connect to an external keyboard:• Plug the keyboard into the USB port with the picture of the keyboard over it.Note: The mouse and keyboard are not included in the package. They are soldseparately.Special multifunction keyboards and wireless keyboards are only supported in thePCoIP USB ports on the left side. You will most likely have to install some driverson the remote host to have full functionality.Connecting HeadphonesYou can connect your notebook to headphones or external speakers. The head-phone jack on the notebook can also detect if you plug in a headset. This is a termused for headphones with the microphone built into one of the wires. For example,this is seen on the iPhone headphones.Plug the audio jack of the headphones/headsets or speakers to the Headphone jackof your notebook.Note: Headsets are not compatible with the Headphone port on the docking sta-tion or with the Microphone jacks on the notebook or the docking station.Connecting an External MicrophoneYou can connect your notebook to an external microphone by pluging the audio jackof the microphone to the Microphone jack of your notebook.Note: If you want to use the docking station Microphone jack while on a virtualmachine, you must install a driver. You can download this driver at http://www.ncst.com/content/downloads-0Note: If you have a USB headphone and Mic device, plug these into the PCoIPUSB ports.