88Cirrus LT User Manual-1.2-041715Chapter 10: Advanced NetworkingAssigning a Static IP AddressYou can only assign a static IP address using the Teradici Firmware.To assign a static IP address for your notebook:1. Select the Options menu in the upper left hand corner.2. Click Configuration then Network.3. Uncheck the Enable DHCP box.4. Type in the desired IP address.Configuring your Cirrus LT for AP RoamingAn enhancement to this feature is being worked on for a future firmware release. Untilthen, here are some recommendations to make your transition from one AP to another asquick and painless as possible.• Ensure under admin settings “Allow saving Wi-Fi Passwords” is checked.• Ensure the APs that you want to roam to and from are saved as preferred networks.• Ensure Autoconnect is enabled under the Wi-Fi networking settings.These three things will ensure that if Cirrus LT sees a stronger wireless network it will tryand autoconnect to it quickly and without user interaction, making the AP roaming discon-nect/reconnect process as quick as possible.
