NDC Instant Wave User Manual
                                 | |
Contents
| 
Trouble ShootingOperational ProblemsThe Wireless adapter appears to be functioning. The Activity LED is active.However, no network PC can be found when run in Infrastructure WirelessNetwork mode• You have only one AP, and the PC is not placed too far from it, but the PCstill has difficulties finding the AP1. Check that the antennas are properly connected to theAP and the station2. Make sure that the AP is powered on and working3. Use Network Watcher to find and join with the APRadio signal quality indicates Yellow or Red whilst in Infrastructure modez The connected AP is too far away1. Use Network Watcher to find an AP with a strongersignal2. Move your PC closer to the connected AP• The adapter antenna is not connected, or its signal path is blocked by metalcasing, e.g. metal filing cabinets1. Make sure the antenna is firmly screwed in2. Arrange the antenna position to get the best radio signalqualityTransmission or reception throughput is low during network file accessing• Many stations are connected to the same group and heavily utilizing thenetwork1. On an Infrastructure wireless network, use NetworkWatcher to find, and connect to, a different AP with onlya few PC connections2. In an Ad-Hoc environment, form your own wirelessgroup with a different wireless domain name to start adifferent channel hopping patternAd-Hoc stations can't join each otherz Two stations started at the same timeReboot one stationz Different Domain Name (ESSID)Change the ESSID, using the 11Mbps Wireless LAN Utilityprogram, to match that of the other stations on the Ad-hocnetworkOR Go to Control Panel/Network/11Mbps Wireless LAN PCICard /Properties/Advanced/ESSID, and change it thereInstantWave High Rate Access Point 19 |
Related manuals for NDC Instant Wave
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine