1Attaching Wall Mount Bracketto a Wall/Flat SurfaceWALL MOUNTBRACKETPosition the Wall Mount Bracket (A) firmly up against a wall or flatsurface and then attach the bracket by inserting 2 mounting screws(user-supplied) through the 2 mounting holes (B) on the Wall MountBracket. Secure the Bracket flush to surface.WALLBSIDE VIEWAMOUNTING SCREWS(USER-SUPPLIED)AC O N T E N T S I N C L U D E :2. Plug-in Connector Cable3. Clamping Knob4. Rubber Washer5. Wall Mount BracketPLUG-INCONNECTOR(IP68-RATED)1. VM1 or VM2 Loudspeaker12345BWARNING: Customer is responsible for selecting the appropriate mounting hardwareand surface. Both the mounting hardware and surface must be capable of withstand-ing 5x the weight of the suspended assembly. Also, it is recommended that a safetycable be attached to the unit where specified to preventthe unit from falling shouldthe mounting hardware or surface attachment fail. Please consult a professionalinstaller if you are uncertain or have any questions regarding the speaker installation.