Note:• If a filter or touch panel is attached to the screen, blocking the speakers, the sound qualityand volume will be affected.• Volume will vary depending on the headphones and microphone being used, so set thevolume as appropriate.• Interference may occur if the micro-cable and speaker cable are positioned close to thedisplay monitor. If noise occurs in the speakers or headphones, move the cables away fromthe monitor.Connect the speaker cable to theAUDIO OUT terminal of the computer.Connect the speaker cable to theSPEAKER terminal of the computer.Using HeadphonesPrepare the headphones (commercially available) and connect as shown in the illustrationbelow.Connect the cable from theheadphones.Using the Multi-media FunctionsYour personal computer must have a voice input / output function.Always use the accessory cable provided.Using the SpeakersPrepare the speaker cable (accessory) and connect as shown in the illustration below.Connect the cable to the AUDIO INterminal on the back panel of the mainunit.* The shape of the terminal of your computer may differ from that shown here. In suchcase, read the instruction manual for your computer and connect as indicated.* Lower the volume if howling occurs. To an IBM PC or Compatible To a MacintoshI - 8