English-8H. SIZE (OSM ROTATION: Landscape) orV. SIZE (OSM ROTATION: Portrait) (Analog input only)Adjusts the horizontal (or vertical) size by increasing or decreasing this setting.If the “Auto Adjust function” does not give you a satisfactory picture setting, a further tuning can be performedmanually using the “H. Size (or V. Size)” function (dot clock). For this a Moiré test pattern could be used.This function may alter the width of the picture. Use Left/Right Menu to center the image on the screen.If the H. Size (or V. Size) is wrongly calibrated, the result would look like on the left drawing. The imageshould be homogeneous.FINE (Analog input only)Improves focus, clarity and image stability by increasing or decreasing this setting.If the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, a finetuning can be performed using the “Fine” function. It improves focus, clarity and image stability byincreasing or decreasing this setting.For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look likeon the left drawing. The image should be homogeneous.Colour Control SystemsColour Control Systems: Seven colour presets select the desired colour setting (sRGB, NATIVE andPROGRAMMABLE colour presets are standard and cannot be changed). Colour temperature increases ordecreases, in each preset.R,Y,G,C,B,M,S: Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and Saturationdepending upon which is selected. The change in colour will appear on screen and the direction (increaseor decrease) will be shown by the colour bars.NATIVE: Original colour presented by the LCD panel that is unadjustable.PROGRAMMABLE: The colour tone that was set up with the downloaded application software is reflected.NOTE: To reset a poor image setting, turn on the monitor by using front power button while holding “EXIT”and “SELECT” buttons at the same time.Tools 1SHARPNESS: This function is digitally capable to keep crisp image at any timings. It is continuouslyadjustable to get distinct image or soft one as you prefer, and set independently by different timings.EXPANSION MODE: Sets the zoom method.FULL: The image is expanded to 1280 x 1024, regardless of the resolution.ASPECT: The image is expanded without changing the aspect ratio.OFF: The image is not expanded.CUSTOM1: Zoom with center fixed. The image is expanded from the rate of 1.00 to 3.00 timesindividually for horizontal (H. EXPANSION) and vertical (V. EXPANSION) direction by 0.01 step.CUSTOM2: Zoom with top left corner fixed. The image is expanded from the rate of 1.00 to 3.00 timesindividually for horizontal (H. EXPANSION) and vertical (V. EXPANSION) direction by 0.01 step.When FINE value iswrong.When FINE value iscorrect.When H. SIZE value iswrong.When H. SIZE value isimproved.When H. SIZE value iscorrect.